anyone having problems running scripts from duramaxtuner??

[bhillamax]

I dont know what I could be doing wrong but every script I run from duramaxtuner just makes my truck run terrible, no power, bogging down blowing a little smoke. The truck is stock with the dpf still on. I was just wondering if anyone else has had a problem like this??

07 LMM

[bballer182]

Make sure you have your units of measure set to imperial before running a script.

[bhillamax]

i did. and i can load the stock tune back in no problems the trucks runs fine. the only thing im doing different on the duramax tuner scripts is changing the 2 dpf tables

[bballer182]

Well thats probably the problem then... You are changing a table that Nick did not intended to be edited....

[bhillamax]

they say to just change those tables if your still running the dpf. so i guess you just cant run those tunes with the dpf on?

[vortecfcar]

If you ever have questions like this, just send the tune to me as you've loaded it into the truck and I'll take a look for you. Should be able to figure it out pretty quick.

Nick@Duramaxtuner.com

Thanks,
Nick

[bhillamax]

Done. Thank you

[vortecfcar]

Make sure you have your units of measure set to imperial before running a script.

This was the issue.. followup.

Sent you the imperial version to compare Brandon.

Nick

[bballer182]

Make sure you have your units of measure set to imperial before running a script.

i did. and i can load the stock tune back in no problems the trucks runs fine. the only thing im doing different on the duramax tuner scripts is changing the 2 dpf tables

This was the issue.. followup.

Sent you the imperial version to compare Brandon.

Nick