I have a 96 tahoe with L31 motor that I just did a 0411 swap on. I just got my efilive V1 on Wed and been playing around looking at things but, not making any changes. I started doing the VE tables by following the instructions.
My biggest issue is that it starts pinging or knocking at about 4000 rpm until it shifts. I logged it and the only thing I notice is my afr drops from 14.68 to 12.12 when the knocking starts.
so I am assuming I need to add more fuel as its getting to lean but not sure if I should do it at the PE modifier vs rpm or some where else.
here is the log from my calc.ve log. it happens at frame 5280.
like I said I am green. very very green so any help is appreciated