Results 1 to 3 of 3

Thread: DSP5 trouble and Reflash problems

  1. #1
    New Member
    Join Date
    Nov 2010
    Posts
    1

    Default DSP5 trouble and Reflash problems

    I have recently tried to install a DSP5 switch and tune my truck with EFI live and so far its been a massive failure. I am not getting any voltage from my switch as well as I cannot figure out how to do a full reflash for my lb7 ecm such as the tutorial instructs me to do every time a make a calibration change. The button is not active to do the reflash. if anyone could help i would highly appreciate it.

  2. #2
    Member SGFastMax's Avatar
    Join Date
    Apr 2009
    Posts
    90

    Default

    try closing the program and reopening it from the tune file itself while plugged into the truck. sometimes this is neccessary to get the full reflash button to illuminate. are you checking switch voltage through the scan tool using the right pids?

  3. #3
    Lifetime Member bobo's Avatar
    Join Date
    Nov 2005
    Posts
    962

    Default

    Full flash first, then check for voltage.
    2005 Twin Turbo Dmax/Allison Ext. Cab Short Box 4X4
    Best 1/4 11.8 @ 118+ on #2 only

    Twisted Diesel Tuning-The leader in Duramax Tuning Services and soon to offer Common Rail Cummins Tuning!

    Bobotune at rocketmail dot com

Similar Threads

  1. Serious problems with full flash for DSP5
    By gman in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 10
    Last Post: May 18th, 2010, 03:37 AM
  2. Auto VE trouble (yes another one)
    By SCP Perf in forum General (Petrol, Gas, Ethanol)
    Replies: 45
    Last Post: April 25th, 2010, 06:49 PM
  3. dsp5 switch install problems
    By jrad12381 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 8
    Last Post: January 27th, 2010, 04:03 PM
  4. Trouble loading DSP5 Tune
    By Dmaxx 02 in forum Duramax LB7
    Replies: 6
    Last Post: September 14th, 2009, 06:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •