Results 1 to 3 of 3

Thread: Vats

  1. #1
    Junior Member
    Join Date
    Oct 2007
    Posts
    43

    Default Vats

    Does anybody know what test can be done on an LSI to determine if the vats are active or not without a tuning tool to look at the program settings.

    thanks in advance
    Yortt

  2. #2
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    Log the State PID for VATS.

    The setting in the PCM won't disable VATS completely in a lot of the LS1 vehicles anyways.
    This is especially true with the Fbody as the BCM controls the starter relay.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  3. #3
    Junior Member
    Join Date
    Oct 2007
    Posts
    43

    Default

    Thanks for the response, I believe with the Australian Holden vats being serial when turned off it does completely disable the vats. Log the State PID for VATS is fine if you have a scan tool I was interested to know if you can check if the vats are active without a tune/scan tool.

Similar Threads

  1. VATs question
    By Cougar281 in forum General (Diesel)
    Replies: 6
    Last Post: June 18th, 2009, 07:29 AM
  2. Cadillac vats ?
    By RPO_Z06 in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: March 12th, 2009, 02:41 PM
  3. How do I disable VATS.
    By PRAY in forum Gen III V8 Specific
    Replies: 6
    Last Post: February 18th, 2009, 11:45 AM
  4. 97 Corvette VATS
    By tracykeyes in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: December 12th, 2006, 01:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •