Results 1 to 2 of 2

Thread: Injector help Bosch 1700cc units

  1. #1
    New Member
    Join Date
    Mar 2008
    Posts
    6

    Default Injector help Bosch 1700cc units

    Hi everyone. I am after some help with some injector settings. I have used siemens 60's and 80's in the past and they idle ok but I am now using Bosch's new 1700cc indy blue replacements. They are a high impedance injector rated at 1700cc at 43.5psi. I have only tried running these for about 20 minutes as I was pressed for time. They idled half reasonable but as soon as the throttle was applied the car played up and ran rich/lean and stalled. I then put my siemens 80's back in the car which is a stock LS1 on E85 with a s400sx4 and the car made 516rwkw. The injectors are running out in the top end so I want to try and use the big bosch units instead. Has anyone used injectors this big? If so, what needs to be done to get them to behave?

  2. #2
    Lifetime Member driver456's Avatar
    Join Date
    Mar 2006
    Posts
    304

    Default

    I know this thread is kind of old.Have you figured out how to tune the 1700cc injectors? I'm in the process of tuning 160# injectors and having a hard time................Paul

Similar Threads

  1. BOSCH Fuel Injectors 0280155868
    By mr.prick in forum Gen III V8 Specific
    Replies: 24
    Last Post: February 11th, 2020, 01:46 PM
  2. Bosch-Suggestion for continuity-cal_link
    By killerbee in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 4
    Last Post: July 27th, 2009, 03:20 PM
  3. Bosch E69 support? Please?!
    By gmtech16450yz in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: February 3rd, 2009, 05:59 PM
  4. Bosch ECM controller i.d.
    By forcefedjunkie in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 3
    Last Post: June 11th, 2007, 08:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •