Ok say if I want to create a map for main inj timing, can I log it using the axis of rpm, map and throttle position or does it only allow 2 axis?
Ok say if I want to create a map for main inj timing, can I log it using the axis of rpm, map and throttle position or does it only allow 2 axis?
Why would you need to do that? There are no 3 axis maps on efilive?
A third axis could be "achieved" if you filter the data.
"All that is needed for the triumph of evil is that good men do nothing..."
Wouldn't the 3rd axis be the data logged?
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
The OP wants the 3 axis's to be RPM, MAP, TP and the data ti be injector timing.
you can make multiple 'projections' of a 4D map onto a 3D graph. Basically you'd make a map of MAP,RPM vs INJTIMING, for all TPS<10%, then >10% and <20%, etc.... you end up with 10 maps for different throttle 'subsets'