Results 1 to 5 of 5

Thread: Failed reflash trailblazer colorado il6 -- avoid by pulling fuses

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    Apr 2007
    Posts
    70

    Default Failed reflash trailblazer colorado il6 -- avoid by pulling fuses

    UPDATE--Anyone having failed re-flashes on Trailbazers, Colorados or any
    IL6 application where the re-flash stops about 1/3 of the way and then locks up--Car then won't start and is completly dead
    I had had a friend with a TECH II read the ECM and it says to unplug the following fuses:
    Under the rear drivers seat fuse box--- # 6 and # 51--
    #6 is for the brake light and # 51 says LGM/DSM ( don't know what that actually is)
    Unlike most GM applications where the radio---amp---accessory--- Bose---aux. or Info fuses are pulled----Have no idea why #6 and #51 are correct but must have some hidden reason why it interupts communication
    YES--flash worked and tune successfully downloaded !!! 99.99% the ECM is not fried and the tune can be re-covered---
    Last edited by joecar; December 21st, 2010 at 09:30 AM.

  2. #2
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,935

    Default

    LGM = liftgate module, I just replaced mine on my 02 P10 and am going to try and flash my stock PCM again. Never had an issue until the LGM went out, fought it for 2 weeks and just got everything fixed. Will report back.

    Update:
    Works now that the LGM is replaced and working, flashing just fine with V8. Still having a weird issue with V7.5 and BBF, going to report on it now.
    Last edited by ScarabEpic22; December 21st, 2010 at 11:56 AM.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  3. #3
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Some of GM's platforms really made a mess of the VPW module behaviour. Sometimes pulling fuses is the only option (as stated on GM's TIS website).
    I no longer monitor the forum, please either post your question or create a support ticket.

  4. #4
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default

    I6 p12 Envoys have issues as well.

    Ill try pulling those fuses and see if it helps with my issue.

    I attempted a flash it failed.

    I tried to do a full flash as recommended in another thread and it also failed.

    Just says retrying previous block.

    Then PCM in unknown state.

    Ill try popppin those fuses and see if it doesnt help me with my issue.

  5. #5
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default

    Fixed it.. Ill document how i recovered it shortly

Similar Threads

  1. Replies: 4
    Last Post: September 10th, 2010, 12:38 PM
  2. Need 05 colorado 2.8L stock tune
    By blazinblue in forum IL6,IL5,IL4 Atlas Engines - P12 PCM
    Replies: 0
    Last Post: April 22nd, 2010, 05:40 AM
  3. Colorado/Canyon tuning
    By jah81592 in forum General (Petrol, Gas, Ethanol)
    Replies: 12
    Last Post: April 23rd, 2007, 02:00 AM
  4. "PCM is in an Unkown State" & "Reflash Failed"
    By foxySS in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: September 8th, 2006, 11:53 AM
  5. EFILive IL6 (6 cylinder) Tuning
    By Blacky in forum General (Petrol, Gas, Ethanol)
    Replies: 61
    Last Post: April 27th, 2006, 01:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •