Mislabeling: IFR & IPVA Row Labels

[Redline Motorsports]

Follow up to this thread....

There is an axis error between KPA Delta 308 and 348......also if these are the correct break points shouldn't it also be corrected in the "Injector Flow Correction" table as well????

In addition if an older file that we started with has value based upon the old breakpoints; when that file is opened up with the software update will it normalize the new breakpoint values???

Howard

[joecar]

Hi Howard,

...
There is an axis error between KPA Delta 308 and 348......also if these are the correct break points shouldn't it also be corrected in the "Injector Flow Correction" table as well????

This has been noted, the 228 should be 328, fixed in the next build.

In addition if an older file that we started with has value based upon the old breakpoints; when that file is opened up with the software update will it normalize the new breakpoint values???
...

No... the new build will display the same cell values and the new axis step.

[joecar]

I redid the LS9->LS1 injector spreadsheet.

I also did the L92->LS1 spreadsheet while I was at it.