Calc.VET: correcting MAF and calculating VE (in single log)

**joecar** · October 6th, 2015

What elevation are you at...?

**zayne0** · October 6th, 2015

I'm at 3200 ft.

**zayne0** · October 6th, 2015

Originally Posted by joecar

+1 what darcy said...

EXT.WO2LAM1 is stuck at 28.5...

which wideband do you have...?

I have an lm2

**zayne0** · October 10th, 2015

Originally Posted by joecar

No worries (many people don't even realize screenshots can be taken like this)...

also post screenshot of your scantool map that you applied to tunetool MAF table .

Click image for larger version.

Name: maf map pic.png
Views: 170
Size: 114.8 KB
ID: 18907

maf map sorry im just now getting back my laptop quit on me, just now got it going again.

**joecar** · October 11th, 2015

No worries, take your time...

In the map properties, on the Data tab set Precision to 3 or 4.

In your map, I see some values creeping too far from 1.0, namely 2.2, 4.0, 2.2, 1.8 and others... your MAF table can't be that far out, post a pic of it.

**joecar** · October 11th, 2015

Post new log and tune files.

**joecar** · October 11th, 2015

Originally Posted by zayne0

I have an lm2

Do both of these:
- LM-2 heater calibration.
- LM-2 free air calibration.

**zayne0** · October 11th, 2015

Originally Posted by joecar

No worries, take your time...

In the map properties, on the Data tab set Precision to 3 or 4.

In your map, I see some values creeping too far from 1.0, namely 2.2, 4.0, 2.2, 1.8 and others... your MAF table can't be that far out, post a pic of it.