Calc.VET: correcting MAF and calculating VE (in single log)

[joecar]

Thank you

I followed the Calc VET tutorial to calculate the VE table. Used "Calculated VE, BEN corrected (g*K/kPa)" so the VE is calculated with data from the MAF ?

Yes, VE is calculated with corrected MAF data.

My next step is to disable MAF and se how the engine would run on the VE table. But due to some unexpected snow I will need to wait for the roads to dry up.

Ok, no worries, that's a lot of snow, take your time, keep safe.