Page 2 of 75 FirstFirst 12341252 ... LastLast
Results 11 to 20 of 743

Thread: Calc.VET: correcting MAF and calculating VE (in single log)

  1. #11
    Member
    Join Date
    Feb 2009
    Posts
    76

    Default

    Thanks Joe,

    I should have been more clear.

    I was looking for some clarification on this.

    "Stoichiometric AFR (see B3601)"


    I didn't know if this value should be changed in the calc pid to reflect what's in your tune.

    Brad

  2. #12
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default

    You can change that. The afr he has is E10 but for gas just change it to 14.63 and you have to go into your tune and make sure your stoich is set to same thing also.

  3. #13
    Member
    Join Date
    Feb 2009
    Posts
    76

    Default

    That's what I thought.

    Thanks

    Brad

  4. #14
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Yes, do everything in EQR.

    Set B3601 to the stoichiometric AFR of the fuel you're using (14.63 gas, 14.12 E10, 9.7 E85...)

    There are gasoline/alcohol content measuring kits cheaply available, they come with a stoich AFR chart.
    Last edited by joecar; January 28th, 2011 at 03:43 AM. Reason: removed reference to CALC.STOICH

  5. #15
    Member
    Join Date
    Feb 2009
    Posts
    76

    Default

    Thanks guys.

    I'm still learning on the calc pids but that seemed like what you meant.

    Brad

  6. #16
    R.I.P Shawn, 1956-2011 WeathermanShawn's Avatar
    Join Date
    Jul 2008
    Posts
    1,807

    Default

    Brad, though the first two PIDS are good ones to have, technically you only need the following to make the formula work (see attachment). This is part of the R&D still being done, but I appreciate the volunteers who are willing to do it.

    As long as you utilize EQ and pick the GM.EQIVRATIO PID in lieu of Commanded AFR, its as easy as it gets.
    Last edited by WeathermanShawn; January 28th, 2011 at 12:41 AM. Reason: Revised..
    2002 Black Camaro Z-28 M6 Hardtop 11.0:1CR 425HP/410TQ SAE (400TQ@3500RPM)
    200cc Heads, 228/232 110+2 Cam, 1 3/4" LT's w/catts, GMMG, Koni Shocks, Hotchkis Springs, 35/21 Sways, 17" ZR1's, 3.90 Gears Roadrunner PCM LM-2 Serial Wideband
    EFILive Closed-Loop MAF/SD Hybrid Tune..


  7. #17
    Member
    Join Date
    Feb 2009
    Posts
    76

    Default

    Shawn,

    I have used EQR since I started using the software.

    That was kinda what sparked the question.

    Thanks for all your help around here.

    You too Joe.

    Brad
    99 Firebird Formula, M6, LS6 intake, headers, catback, lid, BRE cam.

    EFI V2, V7.5.5 (Build 149)
    V8.1.2 (Build 142)
    Boot Block 2.07.01 Oct 14, 2010
    Firmware 2.07.05 Jan 29, 2011
    LC-1 with serial cable
    COS 5

  8. #18
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by WeathermanShawn View Post
    Brad, though the first two PIDS are good ones to have, technically you only need the following to make the formula work (see attachment). This is part of the R&D still being done, but I appreciate the volunteers who are willing to do it.

    As long as you utilize EQ and pick the GM.EQIVRATIO PID in lieu of Commanded AFR, its as easy as it gets.
    Shawn is correct, CALC.STOICH and CALC.AFR are not needed (they are purely a mental aid for viewing AFR from GM.EQIVRATIO).

    Shawn has simplified his posted calc_pids.txt file above by removing those two pids.
    Last edited by joecar; January 28th, 2011 at 03:47 AM.

  9. #19
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Even when using EQR, you still need to set B3601 for the fuel you're running on...

    The PCM does its calculations using EQR, but it still uses B3601 to convert EQR to fuelmass [grams] before calculating injector pulsewidth.

  10. #20
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Thanks.



    Paul found a small bug and fixed it.

    I'll be in Jamaica next week (20th wedding anniversary) and I'm hoping to be able to check the internet.

Page 2 of 75 FirstFirst 12341252 ... LastLast

Similar Threads

  1. Please explain table A0007 TPS VE TABLE cos5
    By WHYTRYZ06 in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: March 18th, 2008, 05:26 PM
  2. OLFA table vs. Custom OS A0008 table
    By 1bar in forum General (Petrol, Gas, Ethanol)
    Replies: 15
    Last Post: January 6th, 2007, 05:25 AM
  3. Table Names vs Table Number
    By lplott in forum Custom Operating Systems
    Replies: 0
    Last Post: May 17th, 2006, 04:14 AM
  4. Main VE Table ?, Logged data vs VE Table
    By dbaxter_ss in forum Tips and tricks
    Replies: 1
    Last Post: December 26th, 2004, 02:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •