Results 1 to 3 of 3

Thread: Lean Cruise discussion on AU vehicles OK ?

  1. #1
    Senior Member
    Join Date
    Oct 2005
    Posts
    158

    Default Lean Cruise discussion on AU vehicles OK ?

    Just wondering if Lean cruise tuning discussions on Australian vehicles is OK on this forum ? If so, I've got some questions based on the stock tunes I've been looking at.

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Of course it is.
    You may be interested in this thread -
    http://efiforum.iqd.co.nz/showthread.php?t=833

    Can't get any more detailed about Lean Cruise than that.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Senior Member
    Join Date
    Oct 2005
    Posts
    158

    Default

    Thanks, saw that previous link, that's the reason I asked the question.

    OK then, I was looking at some of the other stock tunes and comparing it to my Monaro. I noticed that most do not have any values in the AFR offset table other than 1.0. I did notice that the 300kw model does have some offset values, but the speed enabler is set to 200 mph.

    So what is the deal with this feature, do any road cars actually come with it enabled from the factory ?

Similar Threads

  1. lean cruise available on u.s. vehicles?
    By smslyguy in forum Gen III V8 Specific
    Replies: 14
    Last Post: November 30th, 2009, 11:24 PM
  2. can a lean idle or going lean during light cruise harm the engine?
    By ryans1000 in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: November 3rd, 2009, 01:44 PM
  3. Lean cruise on 04 GTO
    By 98ls1blackbird in forum General (Petrol, Gas, Ethanol)
    Replies: 12
    Last Post: August 26th, 2007, 02:11 PM
  4. Lean Cruise and Cruise Control
    By neil in forum Tuning For Economy
    Replies: 11
    Last Post: July 9th, 2007, 09:42 PM
  5. lean cruise
    By 69camaro5speed in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: January 14th, 2006, 10:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •