Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: AutoCal Read List

  1. #1
    Lifetime Member
    Join Date
    Nov 2007
    Posts
    631

    Default AutoCal Read List

    When I load Options.txt on my AutoCal it only shows the first two PCMs
    then copies the second one to the 3,4,5 spot. I don't understand ?

    this is what shows up

    Read 1
    E38
    Read 2
    E67
    Read 3
    E67
    Read 4
    E67
    Read 5
    E67

    even if I select

    E38
    E67
    LS1B
    T42
    T43

  2. #2
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Can you please email me (support@efilive.com) your Option.txt file?
    Andrew
    EFILive Crew


  3. #3
    Lifetime Member
    Join Date
    Nov 2007
    Posts
    631

    Default

    Sent

  4. #4
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    You're running the latest pre-release firmware right (2.07.06)? This issue didn't happen for me till I updated an AutoCal device this second. Once you confirm firmware for me I'll escalate it as a bug.
    Andrew
    EFILive Crew


  5. #5
    Lifetime Member
    Join Date
    Nov 2007
    Posts
    631

    Default

    Correct. I ordered it from Justin, updated it and linked it up. I just wanted everything
    to be good before I handed it off to my customer.

    Thanx
    -Justin

  6. #6
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Thanks, I've escalated the issue mow. In the previous firmware there was only Read1 and Read2 options in Basic Menu Mode. The latest firmware has the 5 options so I'm thinking that the cause of the problem is simply going to be in the expansion of the number of Read options.
    Andrew
    EFILive Crew


  7. #7
    Lifetime Member
    Join Date
    Nov 2007
    Posts
    631

    Default

    SOooo...... there is an Advanced Menu Mode ??

  8. #8
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Yup. In the device settings under Options. There is a selection for Simple or Advanced mode. I wou;dn't recommend sending it to a customer in Advanced Mode, there is just too much more "stuff" there and you support the customer remember
    Andrew
    EFILive Crew


  9. #9
    Lifetime Member
    Join Date
    Nov 2007
    Posts
    631

    Default

    I tried Advanced mode and I got stuck in the scan tool menu <-Exit wouldn't work.
    I had to reboot to get out of it.

  10. #10
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    The 'Exit' option in the Scan Tool menu section works fine for me in Advanced menu mode .
    Andrew
    EFILive Crew


Page 1 of 2 12 LastLast

Similar Threads

  1. AutoCal?
    By Highlander in forum FlashScan V2
    Replies: 2
    Last Post: December 18th, 2008, 06:41 AM
  2. Autocal
    By Alvin in forum Lounge
    Replies: 3
    Last Post: August 1st, 2007, 12:55 PM
  3. Read posts in search...read tut..LM1 help.
    By onfire in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: March 15th, 2006, 01:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •