Results 1 to 2 of 2

Thread: Use of Main VE Table

  1. #1
    Unknown Zone TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default Use of Main VE Table

    What does the PCM do with the values stored in the main VE table?

    From what I can gather (nutshell version), the PCM takes the value from the Main VE table that correspond with the appropriate kPa/RPM reading, reads the MAF, IAT, and possibly the ECT, calculates a g/cyl figure, opens the injector, fires the spark.

  2. #2
    Member
    Join Date
    Nov 2003
    Posts
    73

    Default

    I'm wondering the same thing... (see my post in the Tutorial forum)

Similar Threads

  1. Question in regards to the main VE table...
    By LS1_Dragster in forum Gen III V8 Specific
    Replies: 11
    Last Post: November 3rd, 2009, 12:11 PM
  2. main VE table
    By 1sikmax in forum E37, E38 & E67 PFI ECM's
    Replies: 62
    Last Post: May 26th, 2009, 03:36 AM
  3. Main and Boost VE...one table?
    By hquick in forum Custom Operating Systems
    Replies: 9
    Last Post: February 20th, 2008, 06:10 PM
  4. Main VE Table Question
    By dbaxter_ss in forum General (Petrol, Gas, Ethanol)
    Replies: 15
    Last Post: February 23rd, 2005, 12:38 PM
  5. Main VE Table ?, Logged data vs VE Table
    By dbaxter_ss in forum Tips and tricks
    Replies: 1
    Last Post: December 26th, 2004, 02:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •