Results 1 to 4 of 4

Thread: Newbie with $050B Error

  1. #1
    New Member
    Join Date
    Feb 2011
    Posts
    2

    Angry Newbie with $050B Error

    First off, I'm a newbie... so I apologize upfront if I'm using the wrong terms! I recently bought/received shipment of a new AutoCal from a tuner. I'm struggling with a Error $050B code "Script file not supported by current firmware version"... when I attempt to read the factory settings from my vehicle (2008 GMC Denali 6.2L). I'm running all the current software/firmware from what i can tell from reading up on this forum....

    EFILive Version 8.1.2 Build 142
    Autocal V2 boot block version 2.07.01
    Autocal V2 firmware version 2.07.06

    I found the posting below... and followed Blacky's direction regarding update of the *.obj files... both "manually" using the EFI explorer and semi-automatically using the scan & tune app... still NO LUCK, same error.

    http://forum.efilive.com/showthread....rror-code-050B

    I've attached the "options.txt" file that the tuner directions indicated should be used.

    What the heck am I doing wrong here???

    Signed,
    Frustrated Okie

  2. #2
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Support for AutoCal is provided directly by your tuner. The simple reason for this is that you have engaged the tuner to provide you with a tuning service, the AutoCal is simply the method for delivery of that service. As part of the service the AutoCal device will have been specifically configured by the tuner and if we give you advise which changes that configuration in any way it may cause a subsequent issue for delivery of this service.

    Your issue should be simply resolved in consultation with the tuner and relates to the firmware and versions of the script files on your AutoCal device being out of sync with one another.
    Andrew
    EFILive Crew


  3. #3
    New Member
    Join Date
    Feb 2011
    Posts
    2

    Default

    Understood. I will work with the tuner.

  4. #4
    Lifetime Member
    Join Date
    Nov 2007
    Posts
    631

    Default

    Quote Originally Posted by Tordne View Post
    Support for AutoCal is provided directly by your tuner. The simple reason for this is that you have engaged the tuner to provide you with a tuning service, the AutoCal is simply the method for delivery of that service. As part of the service the AutoCal device will have been specifically configured by the tuner and if we give you advise which changes that configuration in any way it may cause a subsequent issue for delivery of this service.

    Your issue should be simply resolved in consultation with the tuner and relates to the firmware and versions of the script files on your AutoCal device being out of sync with one another.

    I never thought about it like that.

Similar Threads

  1. Error $050B on V2 BBF
    By Gregs in forum FlashScan V2
    Replies: 7
    Last Post: March 19th, 2011, 02:24 PM
  2. error code $050B
    By hawaiianstyle in forum AutoCal
    Replies: 5
    Last Post: January 28th, 2011, 09:53 AM
  3. $050B Error message
    By jennett_c in forum FlashScan V2 BB Logging
    Replies: 36
    Last Post: July 28th, 2010, 05:37 PM
  4. Newbie.
    By Devil_Z in forum Duramax LLY
    Replies: 1
    Last Post: May 24th, 2010, 07:17 PM
  5. Newbie.
    By Devil_Z in forum Gen III V8 Specific
    Replies: 0
    Last Post: May 24th, 2010, 08:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •