February 26th 2011 release candidate 1

[Blacky]

The V7.5 release candidate 1 software is available here:
http://download.efilive.com/Software....154_Setup.exe

The V8 release candidate 1 software is available here:
http://download.efilive.com/Software....147_Setup.exe


IMPORTANT: The new FlashScan/AutoCal firmware V2.07.06 is included in the V8.1.2.147 installation. Please make sure you update all your FlashScan and your customers' AutoCal devices with the latest firmware.

The firmware update also requires that you update all script files (*.obj files) that exist on your FlashScan (or your customers' AutoCal) devices. Failure to update the script files will result in error $050B Script file not supported by current firmware version.

The easiest way to update the script files on your devices is to:

1. Connect your FlashScan or AutoCal device to the PC.
2. Run the EFILive V8 Scan and Tune software.
3. Select the F5: BBX option.
4. Click on the [Read] button to read the current setup of the attached device.
5. Click on the [Program] button which will cause all outdated files to be updated. It is not necessary to save the BBX Options file after performing the above procedure.

If you receive an error $0194 "Write error", it most likely indicates that the Config file system is full. In that case, try formatting the Config file system using the Format option in the [Program] button's drop down menu. Then perform step 5 again.

This release candidate contains fixes for most of the problems that have been reported in the previous pre-release software and firmware. If you have reported a problem and discover that it has not been fixed in this pre-release, please create a support ticket explaining the problem in detail here: http://support.efilive.com/