Lmm?

[mihuntn]

I downloaded the new update and now there isn't a "LMM" under the drop down selection for reading the calibration for the PCM. It has two LBZ selections, E35A and E35B. Is one of these suppose to be for the LMM? I had the LMM selection before I did the update and now it is gone. Please advise.

Thanks

[Tordne]

Lbz->e35a
lmm->e35b

[mihuntn]

Thanks for the fast response! That's what I thought, just wanted to make sure before I flash my ECM...is this going to be corrected in a update?

[Tordne]

I'm at a real computer now so I'll expand a bit

We have where possible moved to align to the controller name and not the engine RPO code. Some other changes:
LB7->E54
LLY->E60
AL6->A40

[mihuntn]

Okay, just wanted to make sure. The LMM was the only engine code not listed, LB7, LLY and LBZ were there with a extra LBZ for E35B instead of E35B LMM. Thanks for the clarification.

Mike

[ScarabEpic22]

Andrew, the controller selection in the V7.5 tune tool shows the E35B LBZ where it should say LMM. Checked V8 first and its correct there.

[Tordne]

Good spotting! I've passed that on now for correction.