Just finished a Trans-go Allison Jr shift kit.. On a 2007 Duramax would like to do the fast learn was told i can do it with EFI live. I just got a the flashscan V2 to use as a scan tool and have it hooked to the truck don't see how yet?
Thanks!
How to do FAST Learn with EFI Live 07 Allison 6sp.
Just finished a Trans-go Allison Jr shift kit.. On a 2007 Duramax would like to do the fast learn was told i can do it with EFI live. I just got a the flashscan V2 to use as a scan tool and have it hooked to the truck don't see how yet?
Thanks!
Fast learn is only done with a TECH 2, you can go in with EFILIVE and reset the TAPS though which will put the trans into fast adapt mode. This is not the fast learn procedure that most people think of though that learns teh clutch volumes while sitting still.
1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.
Thanks.. Do you know how to do this with EFI live?
I keep getting error can't find allison trans?
Is there any update with this. I just got my Flashscan V2 and would like to do a relearn. I'm guessing you still can't do the FastLearn like the tech 2, but what can I do to help get my shifts back in line.
My shifts were perfect before reflashing my stock ECM with a DSP5 tune, now they are slow.
2006 K2500 CC LB LBZ Diesel
connect the scan tool software to the Allison controller and open the DVT tab and it is right there
'07 TBSS, LS2, T42, 3SS, Black on Black on Black, Pretty much stock at the moment. EFILive will fix that
'06 LBZ/Allison 6speed, EC, LB, 1LT, Leather
Current Mods: EFI Live/ PTO High Idle Mod/ Factory Exhaust Brake / BD Full Bore/ TransGo Jr./ TTS Twin Lift Pumps/ MBRP 4" turbo back/ Custom air box mod/ BullyDog Outlook Monitor
465hp/1008tq---7/25/09---Dyno Day Fast SpecialtiesTuning by ME
Posting Permissions
Reply With Quote
