Results 1 to 2 of 2

Thread: conversion to e67. What would be needed aside from the obvious?

  1. #1
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,762

    Default conversion to e67. What would be needed aside from the obvious?

    Obvious
    ECU
    Harness
    Reluctor

    What do we do for transmission? These are CAN stuff we are talking about...

    I take it, this is like the colorado e67s that do have all the tables available...

    Thanks
    "All that is needed for the triumph of evil is that good men do nothing..."

  2. #2
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,798

    Default

    Ive thought about this at length, you'll need both an ECM and TCM, 58x crank reluctor, and appropriate wiring. But the kicker is you're (probably, Im 75% sure) going to have to swap the VVT actuators out as that is where the cam reluctor is.

    Yes the LL8 has all the E67 tables available.

    Why are you thinking about this swap, to run boost? Thats the only reason and even then Id say run a P12 and not hassle pulling the crank and head for an E67 conversion. Plus I dont know if the BCM will even talk to the P12 or E67 from a P10.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, starting the mods
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

Similar Threads

  1. E67 pinout Needed
    By GAMEOVER in forum E37, E38 & E67 PFI ECM's
    Replies: 6
    Last Post: November 22nd, 2010, 10:40 AM
  2. E67 ECM and T42 TCM Help Needed
    By finishline in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: February 7th, 2010, 06:04 AM
  3. LS2 with GMPP E67 - advice needed
    By V8RX7 in forum E37, E38 & E67 PFI ECM's
    Replies: 4
    Last Post: July 2nd, 2009, 11:20 PM
  4. E-85 Conversion
    By vatman02 in forum General (Petrol, Gas, Ethanol)
    Replies: 13
    Last Post: May 26th, 2008, 01:53 AM
  5. E67 & E38 pinouts needed.
    By nycblazer in forum E37, E38 & E67 PFI ECM's
    Replies: 3
    Last Post: March 6th, 2008, 03:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •