Just wondering if anybody is familiar with the new edge cts monitor and how to set it up for the 5 stages. I'm new with efi live and am completely lost but any help would be great.
Just wondering if anybody is familiar with the new edge cts monitor and how to set it up for the 5 stages. I'm new with efi live and am completely lost but any help would be great.
First off are you using the EDGE to tune your truck or EFI Live ??
EFILive and Edge have an agreement that the CTS can switch DSP5 tunes on the LB7 & LLY, it's can't however flash the DSP5 tune, you still need a V2 for that.
I no longer monitor the forum, please either post your question or create a support ticket.
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
Because the CTS is a great monitor but a lot of people run EFILive DSP, so it made sense.
I no longer monitor the forum, please either post your question or create a support ticket.
Ok so I think Ingstory is looking for some instructions......how about it Ross ??
I've never even seen a CTS in a truck, yet alone used one to switch tunes so I don't know how to set the CTS up, that would be a question for Edge surely?.
I no longer monitor the forum, please either post your question or create a support ticket.
So the CTS just sends the info across the data bus and says "change to tune x"
Yes, that's all it does, it cannot reflash a DSP tune.
I no longer monitor the forum, please either post your question or create a support ticket.