edge cts monitor

[L31Sleeper]

I got it

Bonus Features
• Adjust EFILive™ Tuned PCMS on-the-fly
On 2001-2005 LB7 and LLY Duramax engines you can now change the power levels on-the-fly created by your EFILive™ custom tuning software with your Edge Insight CTS! Simply use your EFILive™ software to change your DSP5 Switch Type from “hard wire” to “serial”. Once you are set up to support “serial” communication, simply use the up and down arrow buttons on your Insight to adjust EFILive™ tunes on-the-fly.

[tokymon]

yes just change to sierial works good on cts and cs monitors
just buy the insight one though not the tuners

[L31Sleeper]

The more I research this subject the more I like it !! My supplier sells the Insight CTS for $300 and the CS for $225
I can sell a DSP 5 tune and a CTS for $600. No switches No wiring.......YEA Buddy !!

[GMPX]

Just keep in mind, it's not for the LBZ/LMM Bosch ECM's.

[L31Sleeper]

Just keep in mind, it's not for the LBZ/LMM Bosch ECM's.

Would it be too difficult to switch those on the data bus ?

[GMPX]

I already spent a long time trying to figure out how to, do but in the end the Bosch ECM beat us.