not reading wideband
So I went to check out my tune and I have no wideband readings. The wideband is good as it is putting out the 0-5v it should. I am running a plx wideband and have been for the last two years with no problem till now. I checked all the connections and nothing will show up. Thought it might be the sensor till I checked the output. So any help would be great.
2004 GMC ECSB Z-71 6.0L 219/230 .606/.605 114+4, Patriot Gold Springd, AEM long tubes, 3" magnaflow, PLX Wideband, Comp pushrods, E-Fans
old setup 5.3 AEM Longtubes Modified with 3" Magnaflow, Intake, EFI Live, PLX Wideband, 206/212-.515/.522 112, stock heads milled .030", Patriot gold dual springs, comp pushrods, E-Fans
At the orange connector that plugs into V1, do you see voltage with a DMM/voltmeter...?
yes the connector has power. I have tried it with the obd cable plugged in and with just the box hooked up. nothing either way
2004 GMC ECSB Z-71 6.0L 219/230 .606/.605 114+4, Patriot Gold Springd, AEM long tubes, 3" magnaflow, PLX Wideband, Comp pushrods, E-Fans
old setup 5.3 AEM Longtubes Modified with 3" Magnaflow, Intake, EFI Live, PLX Wideband, 206/212-.515/.522 112, stock heads milled .030", Patriot gold dual springs, comp pushrods, E-Fans
Posting Permissions
Reply With Quote