Is there a spreadsheet for converting GEN4 injector data to GEN3 injector data?

[GAMEOVER]

Does someone have a spreadsheet that I may borrow... so i can convert some GEN4 2008 Escalade injector data into GEN3 truck injector data? If not, is there a way to make it work?

Thanks in advance

[joecar]

Post the GenIV file.

There are 4 or 5 tables that can be mapped over to GenIII, most of them need to be interpolated for different axis steps.

[GAMEOVER]

Thanks Joe, here's the file....

[joecar]

Ok, I'll need a day or two...

[redhardsupra]

joecar, havent we dont this few months ago? i might have that saved somewhere...or just search for the thread where i posted a picture of Barbie making statements about math

[joecar]

Marcin,

Ah, thanks, I'll search for the Barbie math thread... ...I thought those were LS9 injectors.

[GAMEOVER]

Any luck Joe?....

[joecar]

I've been swamped the last few days, I'll try to do it tomorrow morning, I'm sorry for the delay...

these injectors are different than the thread mentioned by Marcin above.

[GAMEOVER]

If it's a headache don't worry about it.... I just thought there was a spreadsheet or something I could've used...

[joecar]

The E38 B4001/B1210 tables have to be interpolated (the E38 DeltaMAP axis has to be mapped to LS1B MANVAC axis) to map to LS1B B4001/B3701.

Also, B4005 has to be interpolated.

The other two tables can be copied easily (since they are straight across).

I don't mind doing it, and I'd rather do it instead of some of my other commitments elsewhere.