Results 1 to 6 of 6

Thread: CALC.PID for E38?

  1. #1
    Lifetime Member samh_08's Avatar
    Join Date
    Oct 2008
    Posts
    298

    Default CALC.PID for E38?

    I haven't had much luck finding, nor making a PID that reads out MPG like the LS1 CALC.MPG does. Again, this is on a E38 controller.

    Can anyone point me in the right direction?

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,779

    Default

    Sam, post your calc_pids.txt file.

  3. #3
    Lifetime Member samh_08's Avatar
    Join Date
    Oct 2008
    Posts
    298

    Default

    Here you go
    Attached Files Attached Files

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,779

    Default

    BTW: you need to add at least 2 blank lines at the end.

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,779

    Default

    Code:
    *CLC-00-020
    MPG                0.0         100.0      0.2  "{SAE.VSS.mph} / ({GM.INJFLOW.lbpm} * {GM.IBPW1} * {SAE.RPM} * 4 / 6250)"
    Which of the referenced pids is not available for E38...? Is it GM.IBPW1...?

  6. #6
    Lifetime Member samh_08's Avatar
    Join Date
    Oct 2008
    Posts
    298

    Default

    Thanks for the tip on the calc.pid.txt Joe!

    GM.INJFLOW.lbpm is invalid for some reason. Tried on 2 different computers just in case. GM.IBPW1 works perfect just like the LS1 controller.

Similar Threads

  1. Can some help me with a calc pid please.
    By pavetim in forum Diesel
    Replies: 1
    Last Post: February 4th, 2011, 12:17 PM
  2. calc.pid help
    By mr.prick in forum General
    Replies: 11
    Last Post: June 1st, 2010, 01:28 AM
  3. e38 dma pid SCALEDCORVE_ doesnt work plus a bad calc pid
    By ringram in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: November 30th, 2008, 10:28 AM
  4. Calc.PID question
    By Elowe65 in forum Diesel
    Replies: 3
    Last Post: March 5th, 2008, 03:52 PM
  5. hp calc PID
    By pwilson22000 in forum General
    Replies: 3
    Last Post: July 24th, 2006, 11:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •