Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Can't BBX full flash (Error $0502, script file not found)

  1. #1
    Junior Member
    Join Date
    Jul 2009
    Posts
    16

    Default Can't BBX full flash (Error $0502, script file not found)

    I've been through all the instructions and formatted my SD card and config files etc.
    I've then reprogrammed the V2 using Scan&Tune.

    I can read the existing tune off my PCM and can "Program Cal" without problems, but can't "Program Full" without getting the aforementioned script error (even trying to program back the tune I've just read)

    Firmware & bootblocks are up to date. What else can I do?
    EFILive Flashscan V2
    2002 LS1
    Firmware: 2.07.09
    Bootblock: 2.07.01

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,977

    Default

    Which ECM/TCM controllers...?

    In S&T, under F5:BBX, goto the F:3Tune tab and make a row which specifies your ECM/TCM;

    click the Save button;

    click the arrow part of the Program button, and then click Program All.

    Then, using EE, goto the Config Files tab, check that the _W.bix, _R.bix, _W.obj, _R.obj, .pmm files for your controllers are present.

    Post your Options.txt file.

  3. #3
    Junior Member
    Join Date
    Jul 2009
    Posts
    16

    Default

    OK, done all that (and not for the first time!)
    I don't have a TCM, I only have an ECM. The engine is a 2002 LS1 from a Pontiac Firebird, mated to a T56 6-speed (it's in a kit car). All the config files are present

    Options.txt file attached
    Attached Files Attached Files
    EFILive Flashscan V2
    2002 LS1
    Firmware: 2.07.09
    Bootblock: 2.07.01

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,977

    Default

    So on your V2 [Config Files] tab, in the lower pane, do you see these files:
    LS1B_R.bix
    LS1B_W.bix
    LS1B_R.obj
    LS1B_W.obj
    LS1B_M.pmm

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,977

    Default

    I pm'd Tech Support.

  6. #6
    Junior Member
    Join Date
    Jul 2009
    Posts
    16

    Default

    yep, all of those, plus gm_p.dtc, ch_p.dtc, ch_u.dtc (and options.txt)
    EFILive Flashscan V2
    2002 LS1
    Firmware: 2.07.09
    Bootblock: 2.07.01

  7. #7
    Junior Member
    Join Date
    Jul 2009
    Posts
    16

    Default

    Quote Originally Posted by joecar View Post
    I pm'd Tech Support.
    Cool, thanks.
    EFILive Flashscan V2
    2002 LS1
    Firmware: 2.07.09
    Bootblock: 2.07.01

  8. #8
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,873

    Default

    Full flashing LS1 controllers isnt supported yet, the controllers that are supported have a [controller name]_F.bix file. Right now its E40, E37, E38, E39, E67, and E78 plus T42 and T43.

    Have to go back to V7.5 and pass through full flash for now.
    Last edited by ScarabEpic22; April 14th, 2011 at 06:07 AM.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  9. #9
    Junior Member
    Join Date
    Jul 2009
    Posts
    16

    Default

    Ah, that answers that question then - is this something that might come along later? Good job I've just bought a new netbook with a car charger
    EFILive Flashscan V2
    2002 LS1
    Firmware: 2.07.09
    Bootblock: 2.07.01

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,977

    Default

    Erik, I should have seen that you're right, full flash isn't present yet.

Page 1 of 2 12 LastLast

Similar Threads

  1. Error $0502
    By Webbs in forum AutoCal
    Replies: 5
    Last Post: December 9th, 2016, 06:31 AM
  2. Error $0502 Script file not found
    By jcow in forum Allison 5 & 6 Speed
    Replies: 5
    Last Post: April 14th, 2011, 12:53 AM
  3. BBx Cal Flash?
    By 8100 Power in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 8
    Last Post: February 16th, 2011, 10:20 AM
  4. Pre Full Flash to Full Flash Tune Question
    By Donovan in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: January 13th, 2010, 11:43 AM
  5. LBZ Full flash update error...
    By 06Dmaxpwr in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 14
    Last Post: December 15th, 2008, 07:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •