Page 1 of 4 123 ... LastLast
Results 1 to 10 of 31

Thread: graph very slow when im do pass through loging

  1. #1
    Senior Member restless@westnet.com.au's Avatar
    Join Date
    Aug 2008
    Posts
    199

    Default graph very slow when im do pass through loging

    when i have the laptop logging through the v2 the lines (graph) is very slow in going across the screen
    it was OK for a while then just got slow it takes 5min to go across the lap top screen
    BBL is fine so i just do that now but it means i have to go home to load the log on my big PC
    cant look at it in the car

  2. #2
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    When you are logging press CTRL+Y to toggle on a display that will show the frame rate being logged. Also advise what "mode" (i.e. Dynamic, Fast-Stream etc) you're logging in. Also the controller type you're connected to and the number of channels of data being logged.

    Also, what is the spec of your laptop? If it is a netbook I've seen (on mine) that they can struggle to eep up with the graph data (gauge data seems alright).

    Basically there is more data needed before we could even begin to recommend an cause/action.
    Andrew
    EFILive Crew


  3. #3
    Senior Member restless@westnet.com.au's Avatar
    Join Date
    Aug 2008
    Posts
    199

    Default

    it is a very old laptop 5+ years and im about to up date it so will try the new one
    and see how it goes if i still have trouble i will post all the asked for info
    thanks bob

  4. #4
    Lifetime Member swingtan's Avatar
    Join Date
    Jul 2007
    Posts
    1,589

    Default

    What PCM / ECM are you logging? If it's a CAN bus system, you may need to alter the logging options.

    Sent from my HTC Desire

  5. #5
    Senior Member restless@westnet.com.au's Avatar
    Join Date
    Aug 2008
    Posts
    199

    Default

    Quote Originally Posted by swingtan View Post
    What PCM / ECM are you logging? If it's a CAN bus system, you may need to alter the logging options.

    Sent from my HTC Desire
    hi mate
    it the E38 in the maloo it worked ok to start with then it just got slow
    but i did ad a lot more pids with the blower probely dont need them but they are all handy to monator stuff bouth channels are nearly full from memory BBL is ok so i have been using that but as said no good if you want to look at it on the run
    cheers bob

  6. #6
    Lifetime Member swingtan's Avatar
    Join Date
    Jul 2007
    Posts
    1,589

    Default

    Under <edit>-<properties>-<logging>-<Scan Mode>

    Make sure you have "Dynamic" checked.

  7. #7
    Senior Member restless@westnet.com.au's Avatar
    Join Date
    Aug 2008
    Posts
    199

    Default

    Quote Originally Posted by swingtan View Post
    Under <edit>-<properties>-<logging>-<Scan Mode>

    Make sure you have "Dynamic" checked.
    in witch part of efilive do i find this
    thanks

  8. #8
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    In the Scan Tool. Go to the Edit menu and select the Properties menu item. Then go to the Logging tab and select the desired Scan Mode. Stream-Fast is actually the best mode (why do you recommend Dynamic Simon?).
    Andrew
    EFILive Crew


  9. #9
    Senior Member restless@westnet.com.au's Avatar
    Join Date
    Aug 2008
    Posts
    199

    Default

    Quote Originally Posted by Tordne View Post
    In the Scan Tool. Go to the Edit menu and select the Properties menu item. Then go to the Logging tab and select the desired Scan Mode. Stream-Fast is actually the best mode (why do you recommend Dynamic Simon?).

    thanks

    stream fast was checked

  10. #10
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    By all means try dynamic mode as well.
    Andrew
    EFILive Crew


Page 1 of 4 123 ... LastLast

Similar Threads

  1. Logged info... Graph?
    By spoolinsteve in forum General
    Replies: 4
    Last Post: April 21st, 2010, 05:53 PM
  2. Loging the TCM? What PID's to use Please?
    By Tarkstoys in forum Allison 5 & 6 Speed
    Replies: 2
    Last Post: December 9th, 2009, 03:01 PM
  3. stupid question? loging and afr??
    By 1Hotbird in forum Gen III V8 Specific
    Replies: 0
    Last Post: December 16th, 2007, 02:59 PM
  4. Loging A0009
    By purrvert in forum Custom Operating Systems
    Replies: 1
    Last Post: April 12th, 2007, 02:24 PM
  5. 50 Dry Shot Graph
    By Beer99C5 in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 11
    Last Post: October 22nd, 2006, 01:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •