Page 2 of 16 FirstFirst 123412 ... LastLast
Results 11 to 20 of 158

Thread: Problem with my Head/Cam 98 LS1 camaro - files attached

  1. #11
    R.I.P Shawn, 1956-2011 WeathermanShawn's Avatar
    Join Date
    Jul 2008
    Posts
    1,807

    Default

    I always advise if it gets too overwhelming at first..Just do the MAF Calibration (with LTFTBENS) first..Its really simple. (Once you know how to make the MAP).

    From there it is easy to figure out your VE Table..
    2002 Black Camaro Z-28 M6 Hardtop 11.0:1CR 425HP/410TQ SAE (400TQ@3500RPM)
    200cc Heads, 228/232 110+2 Cam, 1 3/4" LT's w/catts, GMMG, Koni Shocks, Hotchkis Springs, 35/21 Sways, 17" ZR1's, 3.90 Gears Roadrunner PCM LM-2 Serial Wideband
    EFILive Closed-Loop MAF/SD Hybrid Tune..


  2. #12
    Member
    Join Date
    Apr 2011
    Posts
    85

    Default

    Quote Originally Posted by WeathermanShawn View Post
    I always advise if it gets too overwhelming at first..Just do the MAF Calibration (with LTFTBENS) first..Its really simple. (Once you know how to make the MAP).

    From there it is easy to figure out your VE Table..
    Can I do this without my Wideband working? Do you have a link to a tutorial on MAF Calibration using LTFTBENS? I'm trying to find a good book on understanding GM EFI so I have a better understanding.

  3. #13
    Member
    Join Date
    Apr 2011
    Posts
    85

    Default

    So I can follow these directions to get my LTFTs corrected?
    http://www.bowlingss.com/DownLoads/T...tuninginfo.mht

    (LTFT First Section)

  4. #14
    R.I.P Shawn, 1956-2011 WeathermanShawn's Avatar
    Join Date
    Jul 2008
    Posts
    1,807

    Default

    Quote Originally Posted by blackflag View Post
    So I can follow these directions to get my LTFTs corrected?
    http://www.bowlingss.com/DownLoads/T...tuninginfo.mht

    (LTFT First Section)
    No, thats not my method. Mine is :http://forum.efilive.com/showthread....tire-VE-Table.

    If you select those Pids, make the MAF SELBEN Table (B5001), then you log your LTFTBENS VS MAF Frequency. The Tutorial really helps..there is no other way to explain it..every step is there. Just give it a try..
    2002 Black Camaro Z-28 M6 Hardtop 11.0:1CR 425HP/410TQ SAE (400TQ@3500RPM)
    200cc Heads, 228/232 110+2 Cam, 1 3/4" LT's w/catts, GMMG, Koni Shocks, Hotchkis Springs, 35/21 Sways, 17" ZR1's, 3.90 Gears Roadrunner PCM LM-2 Serial Wideband
    EFILive Closed-Loop MAF/SD Hybrid Tune..


  5. #15
    Member
    Join Date
    Apr 2011
    Posts
    85

    Default

    Quote Originally Posted by WeathermanShawn View Post
    No, thats not my method. Mine is :http://forum.efilive.com/showthread....tire-VE-Table.

    If you select those Pids, make the MAF SELBEN Table (B5001), then you log your LTFTBENS VS MAF Frequency. The Tutorial really helps..there is no other way to explain it..every step is there. Just give it a try..

    And I can do this without having my wideband working right? If so, I will try this tonight. Thanks again for all the help

  6. #16
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Only the portions of the AF and VE tables where CL was present (i.e. where LTFT's were trimming in closed loop).

  7. #17
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    The one log gives you two things:
    - MAF correction multiplier (i.e. the existing MAF is corrected);
    - VE absolute value (i.e. a new VE is calculated from the corrected MAF).

    If you can do the MAF part of the tutorial, the VE part is right there next to it (but in a different map).


    With NBO2 only (i.e no wideband) you can only do that for CL (non-PE).

    With a wideband you can also do that for OL/WOT/PE.

  8. #18
    R.I.P Shawn, 1956-2011 WeathermanShawn's Avatar
    Join Date
    Jul 2008
    Posts
    1,807

    Default

    Mikey, near the end of the CALC.VET Tutorial, I included a method that shows you exactly what you need to do if you do not have a wideband.

    So, yes you can do it without a wideband..I show an example of how you can do exactly what Joecar is saying..

    From Tutorial..

    II. CALC.VE Closed-Loop Tuning Only

    NarrowBand Tuning (No Wideband)
    For users who wish to Tune with only the Factory NarrowBands (NB) and have no Wideband available,
    CALC.VE can be used for the Closed-Loop Trim portion of the Tune only.
    1.Select the same PIDS, MAPS, and Data Filters, as indicated for CALC.VET. Perform Identical Logging
    and Update Calibrations procedures as indicated for CALC.VET.
    2. In Addition apply the following Data Filter to display Closed-Loop Tuning only.
    2002 Black Camaro Z-28 M6 Hardtop 11.0:1CR 425HP/410TQ SAE (400TQ@3500RPM)
    200cc Heads, 228/232 110+2 Cam, 1 3/4" LT's w/catts, GMMG, Koni Shocks, Hotchkis Springs, 35/21 Sways, 17" ZR1's, 3.90 Gears Roadrunner PCM LM-2 Serial Wideband
    EFILive Closed-Loop MAF/SD Hybrid Tune..


  9. #19
    Member
    Join Date
    Apr 2011
    Posts
    85

    Default

    I;m going through the tutorial now. I added the pids.txt file and see them in the PIDS section of the scan tool. I have a 98 PCM and some of the PIDS are grayed out with an X. Then I click to select, it says PID is not valid, select anyway?

    an example is GM.DYNCYL_DMA which is GM.DYNCYLAIR_DMA on my PCM. Should I select it anyway? Or do I need to go into the new PIDS file and make sure the PID names match.

  10. #20
    Member
    Join Date
    Apr 2011
    Posts
    85

    Default

    After right clicking and looking at "more info", I see the PID equation has dependencies. So I will go through the tutorial and select all od the PIDS as listed. If needed, I will try the Validate PID function.

Page 2 of 16 FirstFirst 123412 ... LastLast

Similar Threads

  1. boosted 2010 Camaro files
    By general23cmp in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: September 18th, 2009, 04:27 AM
  2. Cam I Tune A 97 lt1 camaro with efi live
    By Adam Calley in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: January 12th, 2009, 04:22 AM
  3. BIG Auto VE problem - Tune files attached
    By Kevin Doe in forum General (Petrol, Gas, Ethanol)
    Replies: 15
    Last Post: October 14th, 2007, 01:57 PM
  4. 2000 Camaro Head and cam tune file.
    By DaddySS in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: April 12th, 2007, 10:10 AM
  5. A question for you head and cam guys.
    By johnsZ06 in forum General (Petrol, Gas, Ethanol)
    Replies: 24
    Last Post: April 12th, 2006, 06:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •