Results 1 to 4 of 4

Thread: 500inch bbc first fire on ls411 ecu.. external 24x crank ring and vortec cam sync

  1. #1
    Senior Member
    Join Date
    Dec 2008
    Posts
    162

    Default 500inch bbc first fire on ls411 ecu.. external 24x crank ring and vortec cam sync

    Watch "Bbc with gm ls1 ecu first fire up" on YouTube
    Bbc with gm ls1 ecu first fire up: http://youtu.be/qTuVPed3HR0
    This is a 500 inch solid roller bbc with a milodon gear drive,4 7 swap camshaft.has a custom 0s for nitrous feedback control..

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Sounds and runs great, throttle response is instant, good job

  3. #3
    Senior Member
    Join Date
    Jul 2005
    Posts
    188

    Default

    You could also use a Vortec 454 front timing cover(to hold teh crank sensor) and the GM L21 454 24x reluctor. The L21 454 was a BBC that used a 512kb dual 80 pin PCM(like the 0411). It came on the 1999+ Kodiac and Workhorse trucks. It was the 1st BBC that GM used CNP ignition and ETC. The internal 24x relucctor costs $18 from GM.

    You can still use the Vortec distributer for a cam signal, and you can run Coil Near Plug(CNP). Use a Vette LS1 calibration for ETC, or an LS1 Camaro calibration for cable throttle. Just spit balling here.

    Nice setup you have there.

    peace
    Hog
    1997 rcsb stock L31 longblock, Marine Intake with 28# EV6 injectors, L35 2700 stall TC,Hooker LT's 2.007 60ft

  4. #4
    Senior Member
    Join Date
    Dec 2008
    Posts
    162

    Default

    Nope has a gear drive bud...So we made a hub to hold the ring

Similar Threads

  1. cam/crank correlation with vortec dist?
    By Aloicious in forum Conversions / Aftermarket Parts
    Replies: 14
    Last Post: November 15th, 2017, 12:37 PM
  2. 24x reluctor for Vortec truck apps
    By hog in forum Vortec V6/V8 Specific
    Replies: 13
    Last Post: November 4th, 2014, 02:19 AM
  3. setting cam sync
    By rb1 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: April 2nd, 2008, 07:18 AM
  4. crank relearn on 97 L31 vortec truck?
    By sean3393 in forum General
    Replies: 0
    Last Post: July 31st, 2007, 05:29 PM
  5. Vortec Crank Relearn?
    By Lextech in forum Vortec V6/V8 Specific
    Replies: 3
    Last Post: April 17th, 2007, 01:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •