Results 1 to 4 of 4

Thread: E38 PID confirmation

  1. #1
    New Member
    Join Date
    Mar 2011
    Posts
    8

    Default E38 PID confirmation

    Can someone advise whether or not PID ...

    AFM/ DOD on/off Transistion is supported in the E38 controller by EFI Live

  2. #2
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,936

    Default

    Pretty sure it is, I dont have DOD or an E67 but since thats a popular feature of some engines I imagine there's a few PIDs for it.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  3. #3
    New Member
    Join Date
    Mar 2011
    Posts
    8

    Default

    For some reason it does not show up as a supported PID to me so I just checking if I doing something wrong or it really is not supported....... yet, because yes would be great to get in there and "tune" it .......understand HP tuners has that avaialble and some of them making some good gains on the AFM mode

  4. #4
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,936

    Default

    Info->Validate PIDs with your V2 hooked to both car and laptop in the Scan Tool.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

Similar Threads

  1. e38 dma pid SCALEDCORVE_ doesnt work plus a bad calc pid
    By ringram in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: November 30th, 2008, 11:28 AM
  2. E38 Pid selection
    By johnsZ06 in forum Gen IV V8 Specific
    Replies: 50
    Last Post: July 21st, 2008, 06:35 AM
  3. E38 = Not valid PID's
    By MN C5 in forum General
    Replies: 8
    Last Post: July 7th, 2008, 11:34 PM
  4. E38 logging PID ?
    By Lennart in forum Petrol / Gas
    Replies: 1
    Last Post: February 9th, 2008, 07:49 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •