my air bag light came on after a tune

[ace68]

thanks for the help TAZ reseting the VATS didn't do it but when I noticed the vin zeroed while i was doing the vats relearn. So I inputed the correct vin and viola no more light, I would have never found the bad vin info if you did't ask me to do a bcm relearn.
I did a GOOGLE seach for B1001 and I found the $58 module is programed to the vin of the vic and that was my issue thanks.

[ace68]

HAHA I guess we were serching the net at the same time, thanks again for the help.

[Taz]

Nicely done. The air bags are inhibited (don't work) when that light is on - never a good thing !


Regards,
Taz

[joecar]

I seen the VATS relearn but that is for the security module right? I gave it a try anyway with no luck light is still on. I did notice my vin is zeroed out I don't know how long that is been like that never noticed it.

In the file you full flashed that caused the DTC to trigger, check what the value of the VIN is.

[Boost]

Good info!

[ace68]

hummm for some reason the vin is zeroed out on that file but I have been using it for a while; on and off and never had this problem, I must have cleared it????