ScanTool won't open log files with full PID listing

[MadMaxHSV]

This is really annoying. Sometime works but mostly doesn't.

If you open a log file (while not connected to the car), the PID selection is cleared (except the CALC PIDS) so you can see the data properly.
Opening the PID selection first doesn't help, and you can't change the PID selection once the log file is open.
ARGHHH

Is this a known bug or something I can do a different way to get round this?

[joecar]

MM,

Can you post log file and calc_pids.txt file.

[MadMaxHSV]

Log_P15RSX_0027hightimingboost.eficalc_pids.txt

It seems quite random, maybe 1 in 6 attempts it works ok.

[joecar]

Can you describe in more detail the steps how to make this happen...

Thanks.

[MadMaxHSV]

For me just try and open the log file. The PID selection disables nearly all of the PIDs so the logged data can't be viewed on the dashboard etc.

[joecar]

Hi MM,

Are you at V7.5.6.157 and V8.2.1.151, and is your V2 at 2.07.09...?

[MadMaxHSV]

Hi MM,

Are you at V7.5.6157 and V8.2.1151, and is your V2 at 2.07.09...?

hmmm no. Must be a few build levels behind.

V7.5.6112 v8.1.292

Will update and see if that helps

[MadMaxHSV]

My bad, latest version fixed the issue.

Thanks for the support Joe

[joecar]

Ok cool