Can you please send your 'returned to stock' file to support@efilive.com , obviously if it's not being returned to stock 100% then we have a problem
Can you please send your 'returned to stock' file to support@efilive.com , obviously if it's not being returned to stock 100% then we have a problem
I no longer monitor the forum, please either post your question or create a support ticket.
Can you please send that file to me at paul@efilive.com
Thanks
What part(s) of the scan tool do not work?
Regards
Paul
Before asking for help, please read this.
Are you trying to read it using V8 pass-thru reading to a PC, or using the FlashScan as a stand-alone device?
If you're using FlashScan as a stand-alone device, make sure you have downloaded and installed the V8 software and that you have updated the script files on your FlashScan device and that the FlashScan device's firmware is up to date with the latest firmware from the V8 software.
Regards
Paul
Before asking for help, please read this.
What part(s) of the scan tool do not work?
Regards
Paul[/QUOTE]
I am having problems accessing some of the PIDs such as commanded RP, and actual RP. That is most of the problem that I am having.
06 Dodge RCLB 2500 5.9L Hamilton, Maxxspool, Wicked Diesels, Bullseye Power, Industrial Injection, South Bend Clutch, Amsoil, K&N, ARP,EFILive, T&C Diesel, ATS, GDP...
email with stock tune sent.
06 Dodge RCLB 2500 5.9L Hamilton, Maxxspool, Wicked Diesels, Bullseye Power, Industrial Injection, South Bend Clutch, Amsoil, K&N, ARP,EFILive, T&C Diesel, ATS, GDP...
Mine worked!!
06 5.9L, EFILive / Silver Bullet Tuning
06 LBZ, EFILive
Mine has had smarty s06 and smarty SSR on it, however it is returned to stock, and the truck that has read successfully has had both s06 and SSR on it as well.
06 Dodge RCLB 2500 5.9L Hamilton, Maxxspool, Wicked Diesels, Bullseye Power, Industrial Injection, South Bend Clutch, Amsoil, K&N, ARP,EFILive, T&C Diesel, ATS, GDP...
Ok, I tried a different computer, and it now goes very smoothly, including reading the factory ecm. That is only on the truck that worked previously, I have not tried the other one yet. However, when I try to flash even the stock program, I get the message "error, The currently loaded calibration contains one or more incorrect segment checksums. EFILIVE cannot guarantee the integrity of the file and will not allow this calibration to be reflashed into a ECM. Also, when I bring up the flash screen, and click "check status" it attempts 10 times, and displays an error message saying that status is unknown.
I did check the firmware, and for firmware i have version 2.07.11, and bootblock version 2.07.02
06 Dodge RCLB 2500 5.9L Hamilton, Maxxspool, Wicked Diesels, Bullseye Power, Industrial Injection, South Bend Clutch, Amsoil, K&N, ARP,EFILive, T&C Diesel, ATS, GDP...
Do you mean you are attempting to flash it using V7.5? That won't work, you must use V8 to flash a Cummins.
Can you please send the file that shows the checksum errors to me at paul@efilive.com (so far, of all the files I've received today none of them have shown "bad checksums" so I probably don't have it)
Regards
Paul
Before asking for help, please read this.