Installing efi live in a friend's truck and read his current file and saved it in v8. Not knowing better tried to flash his truck back in v8 and it just kept going and going . I talked to Brayden at Fleece and starting getting somewhere and then tried full flash in v7.5 and kept erroring out. It says ECM is in unknown state. I have tuned alot of dmaxes and had same problem before. I took off the batteries and pulled almost all the fuses and keep getting the same thing. this is what I get:

18:03:12.750: Autodetect interface ...
18:03:14.890: Interface not detected
18:03:16.234: Scanning for EFILive FlashScan V2 HAPI
18:03:16.250: Autodetect interface ...
18:03:16.515: Interface firmware version: 2.7.12
18:03:16.531: Connection to [FSV2] interface is OK
18:03:16.750: USB driver version: 2.8.20
18:03:16.750: USB library version: 3.2.4
18:03:16.765: Interface firmware model: FSV2
18:03:16.796: Interface firmware model: FSV2
18:03:16.812: Interface firmware version: 2.7.12
18:03:16.843: Interface firmware date: Jun 06, 2011
18:03:16.859: FlashScan serial number: 003870080398
18:03:16.890: FlashScan license number: 003870080398
18:03:16.906: Disconnecting ...
18:03:17.593: CAN-VPW Bridge Deactivated
18:03:17.609: Disconnected
18:03:18.406: Scanning for EFILive FlashScan V2 USB
18:03:18.421: Autodetect interface ...
18:03:20.578: Interface not detected
18:03:21.500: Scanning for EFILive FlashScan V2 HAPI
18:03:21.515: Autodetect interface ...
18:03:21.796: Interface firmware version: 2.7.12
18:03:21.812: Connection to [FSV2] interface is OK
18:03:21.828: CAN-VPW Bridge Activated
18:03:21.906: Current protocol set to: "ISO 15765 CAN"
18:03:21.921: Autodetect ECM...
18:03:21.953: Connection to ECM is OK
18:03:21.984: Current protocol: "ISO 15765 CAN"
18:03:22.203: USB driver version: 2.8.20
18:03:22.218: USB library version: 3.2.4
18:03:22.234: Interface firmware model: FSV2
18:03:22.265: Interface firmware model: FSV2
18:03:22.281: Interface firmware version: 2.7.12
18:03:22.296: Interface firmware date: Jun 06, 2011
18:03:22.328: FlashScan serial number: 003870080398
18:03:22.343: FlashScan license number: 003870080398
18:03:23.656: Getting status...
18:03:31.734: Getting status, attempt 2 of 10...
18:03:33.765: Getting status, attempt 3 of 10...
18:03:35.796: Getting status, attempt 4 of 10...
18:03:37.843: Getting status, attempt 5 of 10...
18:03:39.890: Getting status, attempt 6 of 10...
18:03:41.921: Getting status, attempt 7 of 10...
18:03:43.953: Getting status, attempt 8 of 10...
18:03:46.000: Getting status, attempt 9 of 10...
18:03:48.031: Getting status, attempt 10 of 10...
18:03:50.062: Status: Unknown.
18:03:51.062: Bootloader version: P_59_v1.9F (09FC-EBB2)
18:03:51.062: Preparing ECM for reflash...
18:03:53.109: Autodetect interface ...
18:03:53.390: Interface firmware version: 2.7.12
18:03:53.390: Connection to [FSV2] interface is OK
18:03:53.406: Autodetect PCM...
18:03:55.437: PCM not detected.
18:03:56.453: ECM may not be secured - did not reply to seed request
18:03:56.468: Initializing ECM...
18:03:56.468: Initializing ECM, step 1 of 4
18:03:56.468: Initializing ECM, step 2 of 4
18:03:56.468: Initializing ECM, step 3 of 4
18:03:56.468: Initializing ECM, step 4 of 4
18:04:01.484: No response from ECM. Retry 1...
18:04:03.640: Autodetect interface ...
18:04:03.906: Interface firmware version: 2.7.12
18:04:03.906: Connection to [FSV2] interface is OK
18:04:03.921: Autodetect PCM...
18:04:05.953: PCM not detected.
18:04:06.968: ECM may not be secured - did not reply to seed request
18:04:06.984: Initializing ECM...
18:04:06.984: Initializing ECM, step 1 of 4
18:04:06.984: Initializing ECM, step 2 of 4
18:04:07.000: Initializing ECM, step 3 of 4
18:04:07.000: Initializing ECM, step 4 of 4
18:04:12.031: No response from ECM. Retry 2...
18:04:14.375: ECM is in an unknown state.
18:04:16.796: Disconnecting ...
18:04:17.484: CAN-VPW Bridge Deactivated
18:04:17.484: Disconnected
18:04:18.046: Data transfer was interrupted.
18:04:20.421: Done!
Now I am stuck and don't know what to do. Need help fast because his truck is dead right now.
thanks