2-3 shift is not shifting please help!!!!! tune is in attachments

[Travose21]

I did 28 inch hoosiers slick with 4.10 gears

[joecar]

Back the WOT shift RPM's down a few hundred rpm.

[joecar]

I did 28 inch hoosiers slick with 4.10 gears

On the Speedo Calculator window did you click the Apply button (once only) on the Shift Point Correction tab to adjust all the effected tables...?

[Travose21]

I didn't calibrated that the previous tuner did really don't want to mention his name can the tranny b messed up

[Travose21]

Ok Joe look at tune real good and call me when u get a chance. Or taz call me to if I can get this car to shift imma beat the shit out this crew down here in new Orleans

[Travose21]

Ok ill back them down to 6000

[Taz]

Hello Travis,

Sorry my friend ... don't do telephone support ... attached is your tune - but with upshift / downshift speeds and TCC apply / release speeds reset to "stock" - for a 2001 Camaro / TransAm with 4.10 gears and 28 inch diameter tires.

This should give you a "clean sheet" to begin fine tuning.


Regards,
Taz

[Travose21]

heres a data log i did last night...

[Travose21]

the second one i was spinning. i think the performabuilt is going out 2-3 clutches what yall think

[Taz]

Hello Travis,

The PIDs you logged are predominantly engine related - for a transmission issue (especially if you suspect clutch slip) a log consisting of transmission related PIDs would be helpful.


Regards,
Taz