Results 1 to 6 of 6

Thread: aem wideband and efilve v1

  1. #1
    Member badls1's Avatar
    Join Date
    Dec 2009
    Posts
    71

    Default aem wideband and efilve v1

    hey i trying to hook up my aem wideband to my efilive v1. right now i have it wired into the 0-5 volt from the wideband to the 0-5 port on the efilive. is this how i want to run it? i have been hearing that you want to run the serial wire from the wideband to the efilive, is that how i should do it instead?
    1989 Notch l Forged 5.3L l PT91.5 l th400
    SBE 4.8L l S475 l th400 8.62@156 (old setup)

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    hi badls1,

    V1 only has analog inputs, it does not have a serial input.

  3. #3
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,935

    Default

    What Joe is saying is to use a serial WBO2 connection you need a FlashScan V2.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  4. #4
    Member badls1's Avatar
    Join Date
    Dec 2009
    Posts
    71

    Default

    okay. so did i wire it correctly then, if i run the analog wire and a ground to the port on the side of my v1? will it be accurate doing it this way or not?
    1989 Notch l Forged 5.3L l PT91.5 l th400
    SBE 4.8L l S475 l th400 8.62@156 (old setup)

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Yes, correct, signal wire to pin C or E and ground wire to pin D on the side port on V1.

    You may have to make a calc pid for it, the AEM user manual should show you the voltage:AFR relationship (if it is the same as some other wideband then you can use that wideband's calc pid).

  6. #6
    Member badls1's Avatar
    Join Date
    Dec 2009
    Posts
    71

    Default

    alright thanks for the info. i think its the same as the plx wideband
    1989 Notch l Forged 5.3L l PT91.5 l th400
    SBE 4.8L l S475 l th400 8.62@156 (old setup)

Similar Threads

  1. AEM wideband to FlashScan V2
    By T34418L31 in forum FlashScan V2
    Replies: 61
    Last Post: May 13th, 2015, 11:22 PM
  2. aem wideband vs. innovative lc1
    By badls1 in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: May 29th, 2010, 06:58 AM
  3. pids for AEM wideband
    By blazinblue in forum FlashScan V2
    Replies: 11
    Last Post: April 22nd, 2009, 03:04 PM
  4. How to hook up AEM wideband to interface? help
    By mvvette97 in forum Gen III V8 Specific
    Replies: 0
    Last Post: October 11th, 2008, 05:16 AM
  5. AEM wideband gauges
    By madprof01 in forum External A/D inputs
    Replies: 5
    Last Post: June 5th, 2006, 08:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •