Quote Originally Posted by bobo
Before changing the boost levels, you must turn off the EGR. Here is what ya do:

Set B1502 to 0. Set B1503 to 8000. The EGR will never come on. You also need to set the DTC'S Processing Enablers to X: Not Reported for P0401,p0403,p0404,p0405,and p0406. This will eliminate the EGR test at start up that could set a code from shutting the EGR off or having too much boost during the startup test. Doing these few tasks will completely disable the EGR. EGR will remain closed at all times. You can log it to prove it to yourself also. You need to select the desired pid (an EGR pid) and record the data.
So Bob, if I'm thinking correctly, I should now be able to remove my blocker plate and Fingerstick, right?