Calibration Summary Checksum invalid but disabled
At the completion of the calibration the following segments were displayed as either checksum valid but disabled or invalid and disabled:
Calibration Verification - Checksum invalid but disabled
Internal Flash - Checksum valid but disabled
External Flash - Checksum valid but disabled
Where do I go from here?
Was this from an ECM read? What year Model?
2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
2017 Corvette 3LZ Z06 M7 with Z07 Package
06 Cummins. I found a post from 6 months ago where it was recommended to get a fresh copy of the base stock file.
Get another from here
2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
2017 Corvette 3LZ Z06 M7 with Z07 Package
Thank you! What is the difference between these two files: Which one should I download?
2006 Dodge Ram (Federal) Truck Automatic ISB 5.9 Litre (35325553).ctz758.1 KB4 months ago
2006 Dodge Ram (Federal) Truck Automatic ISB 5.9 Litre (35325853).ctz2006. 1 KB4 months ago
That's the Calibration number. Your original stock file should be one of those. Either ending in 5553 or 5853
2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
2017 Corvette 3LZ Z06 M7 with Z07 Package
Thank you.
Your Welcome, Don't forget to change the VIN number within the stock tune file that you end up using!
2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
2017 Corvette 3LZ Z06 M7 with Z07 Package
Where do I change the VIN number? Would I need to make the edit within EFILive V7.5?
Yes in V 7.5 - see screen capture attached
2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
2017 Corvette 3LZ Z06 M7 with Z07 Package
Posting Permissions
Reply With Quote