Motor goes into Limp and triggers P0606! HELP!
OK guys...I'm at my wits end. We're talking an E67 TBSS LS2 with CAI and Burst Knock zero'd out. Everytime I jab the throttle or WOT from idle it goes into limp mode.
You can tell the LIMP MODE kicking in when the red AFR dips. I've attached some logs. Any ideas where to make adjustments.
Log_0003.efi
Log_0001.efi
Log_0004.efi
Log_0000.efi
Log_0002.efi
Last edited by TBMSport; June 30th, 2011 at 04:59 PM.
Trailblazer "RS" 5.3L 6L80
4x4 & '07 TBSS LS2 6L90 AWD
Did you change t body?have u logged gmcpufault.I'm dealing with the same issue myself.have you checked all your voltage to the pedal and tbody?did you change the OS? Anything.g out of range?
You sure you have the right TBSS base calibration Jesse?
gmh308...that's exactly what was wrong. After I posted I compared my VE tables and low and behold somewhere in my messing around with calibrations I had made several Generate VE Coefficients Calculations and my Base numbers were WAYYYY off. I started with a stock calibration and she's all good now...well still freaking out with TC/Stabilitrak and PE is a bit delayed, but I think I have the fix for those figured out. Thanks guys.
Posting Permissions
Reply With Quote