Results 1 to 5 of 5

Thread: OS3 installed

  1. #1
    Lifetime Member oztracktuning's Avatar
    Join Date
    Nov 2005
    Posts
    596

    Default OS3 installed

    I have done autoVE over the past few days and got it to a stage where i could upgrade my program to the new OS3 and setup all the other tables.

    It all worked fine. I now have a duel spark table, lean cruise enabled, PE at 95% and stoic to 75MAP then blending to similar to PE. I may as well turn PE off.

    I have even enabled IAT correction from data i collected while building the new VE table and i have it at about 1% correction every 10 deg.

    At the moment i have my desired spark table 3 deg above the lower one. I will trim them both together for a while keeping a 3 deg gap and then aim to pump up the hioctane table in cooler conditions.

    How do i set the amount of knock needed to learn either way with the spark tables. I would also like to plan how i can setup a table for ethanol fuel as well.

    Having some trouble with surging - have played a little with the timing correction of hi and low idle. But i think the issue is with idle air or something else.

    My VE table is not ideal near 400-800 i wish there was a 600 row as well !

    Great work Blacky and GMPX its a sweet and powerful package you have created.

  2. #2
    Senior Member
    Join Date
    Jun 2005
    Posts
    126

    Default

    What size injectors are you running that you don't have ideal VE in the 400/800 rows?
    Are you constantly getting autoVE of like high 70's low 80's BEN?
    That is what I am seeing on the cars I have done with 60lb injectors.

  3. #3
    Lifetime Member oztracktuning's Avatar
    Join Date
    Nov 2005
    Posts
    596

    Default

    I just made the 400rpm and 800rpm cells much more similar hoping this may help some idle issues. I have 36lb injectors.

  4. #4
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    505

    Default

    Flyer - are these the 36 lb GTP (white) injectors?? If they are I have Injector Offset and Pulsewidth Tables from an ASA tune (58 psi fuel pressure) - if you want them.

    What are you tuning?? Mods??

    FWIW.




    joel

  5. #5
    Lifetime Member oztracktuning's Avatar
    Join Date
    Nov 2005
    Posts
    596

    Default

    They are the common SVO30 injectors. But thanks anyway.

    The car is a VX Clubsport 216 220 Cam 114LSA 1.8 rockers
    SS3600 Qtecs Ported TB (like a S3) 3.73 25% UDP
    Ported Heads at 10.7:1
    Its run 11.765/115 1.622 on MT ET street Radials.
    This was pre-heads.
    Last edited by oztracktuning; January 23rd, 2006 at 05:21 PM.

Similar Threads

  1. Can't get v2 installed on vista 64 bit
    By ThunderDan74 in forum FlashScan V2
    Replies: 8
    Last Post: February 26th, 2011, 03:42 PM
  2. LC-1's Installed
    By Gelf VXR in forum Gen IV V8 Specific
    Replies: 2
    Last Post: August 30th, 2007, 09:05 PM
  3. Need Help just installed my WB02
    By Spdfrk1990 in forum Gen III V8 Specific
    Replies: 4
    Last Post: June 16th, 2007, 12:00 PM
  4. LC-1 Installed
    By mcwarren in forum General
    Replies: 9
    Last Post: April 16th, 2006, 08:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •