Results 1 to 3 of 3

Thread: How to tune MAF on E38

  1. #1
    Lifetime Member Gregs's Avatar
    Join Date
    Sep 2008
    Posts
    306

    Default How to tune MAF on E38

    Hey guys I did some searching and I can't seem to find it, but i'm looking for a parameter in the e38 that is like b0120 for the ls1 platform(rpm threshold for airflow calculation). I want to run maf only so i can get the maf tuned. i'm new to the e38, been doing the ls1's for a while.

    03 Silverado 5.3 ECSB 4x4 Z71
    Comp Cam 206/212 .515/.522 112 lSA, hardened rods with LS9 springs

    2010 Tahoe VVT AFM 5.3
    Stock for now

  2. #2
    Lifetime Member Chalky's Avatar
    Join Date
    Sep 2003
    Posts
    617

    Default

    http://forum.efilive.com/showthread....8024-Set-to-10

    It looks like B8024/B8025 are the tables to MAF only.
    2015 Z06 A8

  3. #3
    Lifetime Member Gregs's Avatar
    Join Date
    Sep 2008
    Posts
    306

    Default

    Hey thanks, thats what I needed to know

    03 Silverado 5.3 ECSB 4x4 Z71
    Comp Cam 206/212 .515/.522 112 lSA, hardened rods with LS9 springs

    2010 Tahoe VVT AFM 5.3
    Stock for now

Similar Threads

  1. First E38 tune, MAF recal?
    By joshp14 in forum Gen IV V8 Specific
    Replies: 9
    Last Post: May 29th, 2011, 03:06 PM
  2. Replies: 10
    Last Post: August 27th, 2009, 10:38 AM
  3. Tune VE and MAF tables or leave VE stock and tune MAF only
    By BlackGMC in forum Gen III V8 Specific
    Replies: 2
    Last Post: August 4th, 2008, 08:05 PM
  4. 2 Bar E38 tuning with the MAF..
    By Redline Motorsports in forum E37, E38 & E67 PFI ECM's
    Replies: 8
    Last Post: August 4th, 2007, 01:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •