Results 1 to 6 of 6

Thread: Would anyone care to walk me through.........

  1. #1
    Junior Member Tuned55's Avatar
    Join Date
    Jan 2010
    Posts
    25

    Default Would anyone care to walk me through.........

    I'm lookng for help learning EFILive with FlashScan V2. I'd be happy to call at your convinence while I'm sitting in a 98 Vette hooked up and ready to go. My goal is not so much to tune at this time as I want to remove VATS and emissions. I played with this now for the 3rd time since I bought it a year ago and I just need some basic help. I'm in MT time zone pretty much any time would work for me.

    Thank You

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,798

    Default

    Hi Bruce,

    VATS: see table G1201.

    Emissions: set all the emission related DTC's to Not-Reported (disclaimer: for off-road usage only), be careful to retain DTC's that would provide you useful info if a component failure occurs.

  3. #3
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    Hello Bruce,

    I provided you with LS1-A specific VATS info, EGR info, and general emissions info in your other thread attached below ...

    http://forum.efilive.com/showthread....ench-Tune-Help

    Follow those directions as a starting point, and monitor any / all DTCs as you go.


    Regards,
    Taz

  4. #4
    Junior Member Tuned55's Avatar
    Join Date
    Jan 2010
    Posts
    25

    Default

    I realize you provided the info for the fix but my issue is how do I get to the proper area to correct it?

  5. #5
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    Hello Bruce,

    Two ways to connect to your LS1-A PCM - the OBD-II port in the vehicle wiring harness that will be used in your project, or a bench top interface. EFI Connection offers LS1-A bench top tuning harnesses, and also bench top tuning power sources. I own all of of their Gen IV ECM / TCM harnesses - the workmanship is excellent and the price is competitive.


    Regards,
    Taz

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,798

    Default

    Quote Originally Posted by Tuned55 View Post
    I realize you provided the info for the fix but my issue is how do I get to the proper area to correct it?
    Hi Bruce,

    Open the file in the tunetool, enter in the table id in the search box on the upper left (enter it with first letter in uppercase) and click Search... I can walk you thru that on the phone if you like.

    Do you have the file from your PCM, please post it here.

Similar Threads

  1. An AutoVE walk through?
    By mvnvltn in forum Gen IV V8 Specific
    Replies: 2
    Last Post: December 29th, 2008, 03:54 AM
  2. NE1 Care to look at my tun and log files after h/c install?
    By Chalky in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: December 6th, 2006, 02:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •