Link ScanTool to TuneTool Data Logging

[WyoFreeride]

I have no immediate plans for supporting the 6.7. Lately travel that work and family has got me going, I don't plan on taking on any extra ventures. Heck, I've got an injection pump that has been needing to be installed well over a month that I can't get too for my personal own vehicle. Anyhow, hopefully there will be another fellow 6.7 member that is quite familiar with the software and will take on the challenge of supporting the linking feature.

Time is limited for me right now too, but I would like to be able to help out, and will be needing the 6.7 features more than the 5.9. I will try to get a start, but testing will be limited as I don't own anything I can log yet (my truck is a 2010). I am working on a couple 08s though, and will post as I make progress, if that will help everyone else. -Joe

[comnrailpwr]

Thanks a lot.

[06redram]

Here is the updated version 11/1/2012 for 5.9 cummins 2005.5 & 2007 that link scantool other maps

[BlackCPG]

This file has 6.7 links in it.
I cannot guarantee this file will work properly, as I do not have a 6.7 to test with.

Edit: The cal_link.txt below has the 6.7 tables linked to the tune tool as well as all of the above 5.9 edits. I just do not have a 6.7 truck around to verify accuracy. Sorry if the original post was confusing.

cal_link.txt

[06redram]

Sorry this update is for the 5.9 cummins. I do not have 6.7 truck nor do I have the 6.7 cal_link file to modify it to link it to scantool. But if you have cal_link file and a data log file with all the tables that needs to be link I can try working it out for everybody needs. Shoot me an email with both files. My email is: bigcumminsdiesel@msn.com

[BlackCPG]

In the attached .zip file is the 6.7 and 5.9 links. They are in the new .ini format for V7.5 Build 232.

[06redram]

Thanks for the update!

[comnrailpwr]

Appreciated

[06redram]

I have the newest update V7.5.7(245) but the D0787 Runway highlighting stop working with new update. Is there a cal_Link update to fix the issue or is there a software issue

[cindy@efilive]

Cal linking file structure changed some months back - maybe as far back as August.

Each controller now has it's own file.

Cheers
Cindy