Just updated yesterday. All my files with PID arrangments were affected. Many of the PID's are missing including AFR.GM. How do I get them back?
Just updated yesterday. All my files with PID arrangments were affected. Many of the PID's are missing including AFR.GM. How do I get them back?
2002 Chevy truck, SCSB 2WD, Stroked LS3 w/Big Mutha Thumper cam
2002SS Camaro LS7/427 with stock suspension setup
2012 Chevy truck, SCSB 2WD, Magnaflow exhaust + K&N
Try:
- connect V7 to vehicle and validating pids,
- File->Enter VIN,
- File->Select Controller,
- on PIDs tab uncheck Supported, check Names, select All for System.
Click on the Caption column heading to sort alphabetically on that column, then scroll down see if you can locate the pid(s).
When I try to connect I get "FlashScan/AutoCal Firmware is not compatble with the installed EFIlive software"
Tried the update again also...build 170 already installed.
So now scan tool does not work or tune tool.
What's my next move. Done updates before and they always worked with no problem.
2002 Chevy truck, SCSB 2WD, Stroked LS3 w/Big Mutha Thumper cam
2002SS Camaro LS7/427 with stock suspension setup
2012 Chevy truck, SCSB 2WD, Magnaflow exhaust + K&N
Update the firmware on your V2 using EFILive HAPI. Install V8 software, then open V8 Scan & Tune. Click the little V2 in the taskbar near the clock in windows. Click F6: Firmware, update bootblock if necessary then update the firmware.
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
How do I update the firmware?
2002 Chevy truck, SCSB 2WD, Stroked LS3 w/Big Mutha Thumper cam
2002SS Camaro LS7/427 with stock suspension setup
2012 Chevy truck, SCSB 2WD, Magnaflow exhaust + K&N
OK...got everything updated but still missing PID's
Commanded AFR and KR missing for example.
Have Commanded Lamda though.
Last edited by 67SS509; July 22nd, 2011 at 01:46 PM.
2002 Chevy truck, SCSB 2WD, Stroked LS3 w/Big Mutha Thumper cam
2002SS Camaro LS7/427 with stock suspension setup
2012 Chevy truck, SCSB 2WD, Magnaflow exhaust + K&N
When I open Default Imperial.PID file or any file there is no KR or Commanded AFR in the list (supported unchecked)
2002 Chevy truck, SCSB 2WD, Stroked LS3 w/Big Mutha Thumper cam
2002SS Camaro LS7/427 with stock suspension setup
2012 Chevy truck, SCSB 2WD, Magnaflow exhaust + K&N
When I open "E38 ECM Metric.PID" AFRATIO and KNKRET are not in the list
Last edited by 67SS509; July 22nd, 2011 at 02:44 PM.
2002 Chevy truck, SCSB 2WD, Stroked LS3 w/Big Mutha Thumper cam
2002SS Camaro LS7/427 with stock suspension setup
2012 Chevy truck, SCSB 2WD, Magnaflow exhaust + K&N
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.