Results 1 to 3 of 3

Thread: Problem Datalogging

  1. #1
    Junior Member
    Join Date
    Nov 2005
    Posts
    20

    Default Problem Datalogging

    I just tried to log data on my LB7 today and the scan tool will connect but when I try start real time logging or record I keep getting an error message. Most of the time it is the invalid mode one. I just got a new laptop and it has never worked with this yet. The tuning tool works fine on my truck. I did log data with this cable with my previous laptop. What is the fix for this?

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Need a bit clearer detail on what the error is first.
    It maybe too many PID's selected, or you didn't validate the PID's once connected to the truck therefore the scantool is requesting illegal data from the ECM.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    EFILive Distributor Trippin's Avatar
    Join Date
    May 2004
    Posts
    860

    Default

    Launch the scan tool:

    Edit>Properties>Logging....switch to "Dynamic" mode and then "OK" in the lower right hand corner.
    www.socaldiesel.com



    EFILive-DSP5......Switch your Attitude!
    EFILive-CSP5......The Smart Way To Switch Your Cummins Tunes!
    EFILive-DSP4......Switch Your Colorado and Canyon Too!

Similar Threads

  1. High speed onboard datalogging
    By limited cv8r in forum RoadRunner Real-Time PCM Emulator
    Replies: 19
    Last Post: September 14th, 2012, 03:35 PM
  2. Direct (BDM / JTAG) Datalogging?
    By N0DIH in forum RoadRunner Real-Time PCM Emulator
    Replies: 0
    Last Post: April 28th, 2010, 04:01 PM
  3. PID Problem w/BBB - Asked by Cougar 281 (FRPDES problem)
    By Jasondt2001 in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: March 23rd, 2008, 01:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •