Shutting down torque via B2515

[68problemchild]

I assume this setting is in minutes. Its the time to wait before the car can enable torque reduction.

What is the max I can set this to trying to disable torque reduction? It may provide a temporary fix provided I don't go on a two day drive.

?? Currently its set to "2".

Thanks all!!!!!

[joecar]

Hi Pat,

You mean B2512...? It is in seconds.

[68problemchild]

I think we found the problem. Accelleration threshold limiter.


Hope this helps someone.

[joecar]

Which table id...? And what did you change in it...?

[68problemchild]

The car is still at the dyno and Justin is making his changes in HP tuners. I should have the car done Weds and I can download the tune in EFI live and post the exact settings. Sadly I cannot read the HP tune so he cannot send it to me.

This has been a really tough road so I am pretty darn happy to finally get an L92 running with a 4 speed.

FYI, the clean successful base tune we finally ended up using is as follows:

2007 Silverado Vortec VVT new body style truck OS, 2 Wheel drive with 4L70E. Only difference really is the engines displacement.

I will note that this stock tune did have the same problem before the Accelerator threshold limiter fix was put in.

Thanks all for your help. I could not have gotten this far without you all.

[joecar]

Get your tuner to send you the HPT file, you can read it using the HPT demo software from here:

http://files.hptuners.com/support/msi/DemoSoftware.msi

Install the software, then start the VCM Editor, click Demo Mode, then open your file.

[gmh308]

Get you tuner to send you the HPT file, you can read it using the HPT demo software from here:

http://files.hptuners.com/support/msi/DemoSoftware.msi

Install the software, then start the VCM Editor, click Demo Mode, then open your file.

2011 and they finally released demo type software? Wow.

[joecar]

2011 and they finally released demo type software? Wow.

Yes, but it is hard to find on their site, you have to look at foff667's signature.

[gmh308]

Yes, but it is hard to find on their site, you have to look at foff667's signature.

mmmm....hidden demo software...."foff", if that is short for f-off...such a good attitude.

[Taz]

Ian you missed your true calling in cryptography ... thanks for the chuckle at HPT's expense !


Cheers,
Taz