Release Candidate 1, Aug 04, 2011

[Blacky]

It might just be me but the latest release has crashed my system twice now. System in 64 bit WIN 7 Toshiba. Both crashes occurred when reviewing scantool data.. Once with TuneTool open as well. My screen slows and I lose mouse function. I had to do restore to regain system function and reinstalled mouse drivers to get system back. Also had to install a usb mouse to get system working.

By chance, it is possible to download the July 18th releases of 7.5 and V8?

The previous releases are still available here:
http://forum.efilive.com/showthread....e-July-29-2011

Regards
Paul

[Chalky]

Forgot, have latest firmware. No going back I guess.

[Duramax 6.6L]

My system is is also crashing, Had to reintall a disk image to fix. Will wait for next release to try again as I also updated the firmware.

I know there is a way to go backward, but not sure how to do it.

[Duramax 6.6L]

Blacky could you post how to revert to an older firmware version?

[minytrker]

Going back to the previous release I now had PID's that don't work. I still have problems with connecting, it took me 45 mins just to download a tune and to get the scan tool working.

How do I go back to the last firmware and bootloader? It won't you do it by the normal update methods.

I lost almost a $1,000 dollars today and had to customers drive over 2 hours each and I couldn't tune there vehicles. I need to go back to the last version really bad.

[Blacky]

The attached firmware should work with build V8.2.1.166-167 and V7.5.7.176-177.

Regards
Paul

[Chalky]

The attached firmware should work with build V8.2.1.166-167 and V7.5.7.176-177.

Regards
Paul

Thank you!

[Duramax 6.6L]

The attached firmware should work with build V8.2.1.166-167 and V7.5.7.176-177.

Regards
Paul

Thank you for the quick reply

[minytrker]

The attached firmware should work with build V8.2.1.166-167 and V7.5.7.176-177.

Regards
Paul

How do I go back to the firmware before 166 and 176.......ALL my problems started when I went to the new firmware and to build 166 and 176. I can't afford for it not to work, so I know my V2 works with the previous build and firmware. Insn't there a manual way to override and flash the firmware back to an older version?

[Duramax 6.6L]

I lost almost a $1,000 dollars today and had to customers drive over 2 hours each and I couldn't tune there vehicles. I need to go back to the last version really bad.

I have the same problem as you, at least you only lost money, I lost two LBZ computers I had to replace and program back to stock tunes with Tech II, I can not communicate with the ecm any more.