Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Error $0502

  1. #1
    Lifetime Member Gregs's Avatar
    Join Date
    Sep 2008
    Posts
    306

    Default Error $0502

    Every time i try to bbf i get error $0502. I've updated everything and i found a few threads from like a month ago when it was a known problem. I followed the advice but still no luck. V8 and V7.5 were re-downloaded and installed as of tonight. I also updated boot block, firmware, and reprogrammed everything. Just wondering where to go from here

    03 Silverado 5.3 ECSB 4x4 Z71
    Comp Cam 206/212 .515/.522 112 lSA, hardened rods with LS9 springs

    2010 Tahoe VVT AFM 5.3
    Stock for now

  2. #2
    Lifetime Member Gregs's Avatar
    Join Date
    Sep 2008
    Posts
    306

    Default

    bump

    03 Silverado 5.3 ECSB 4x4 Z71
    Comp Cam 206/212 .515/.522 112 lSA, hardened rods with LS9 springs

    2010 Tahoe VVT AFM 5.3
    Stock for now

  3. #3
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    The $0502 indicates that a file required to support your controller is not present on the device. Make sure you have the desired controller(s) selected under the BBX Tune area, and that you have [Program]ed the device. This will copy the necessary support files down to the FlashScan V2 device.
    Andrew
    EFILive Crew


  4. #4
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    Take a look at the thread attached below ...

    http://forum.efilive.com/showthread....hlight=%240502


    Regards,
    Taz

  5. #5
    Lifetime Member Gregs's Avatar
    Join Date
    Sep 2008
    Posts
    306

    Default

    hmm, thanks guys for the help. I checked and i have the right controller selected and programmed. I also followed the link taz posted and everything seems fine there also??

    03 Silverado 5.3 ECSB 4x4 Z71
    Comp Cam 206/212 .515/.522 112 lSA, hardened rods with LS9 springs

    2010 Tahoe VVT AFM 5.3
    Stock for now

  6. #6
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    I'm wondering if the 'Option.txt' file you have is referring to controllers by their old names, and therefore not copying scripts etc correctly. Perhaps try the following:

    This is an outline process for a full removal:
    - Backup the ‘C:\Program Files\EFILive’ and ‘Documents\EFILive’ folders (don’t perform the backup above under this location).
    - Uninstall the existing EFILive software.
    - Remove the ‘C:\Program Files\EFILive’ and ‘Documents\EFILive’ folders.
    - Delete the ‘HKEY_CURRENT_USER\Software\EFILive’ Registry key.
    - Download the latest full install
    - Install the latest release

    The reconfigure the V8 software (PIDs, controllers etc.) and program. Also, format the Config filesystem before programming to make sure it's all clean.

    Cheers,
    Andrew
    EFILive Crew


  7. #7
    Lifetime Member Gregs's Avatar
    Join Date
    Sep 2008
    Posts
    306

    Default

    Thanks for the reply! I will try this first thing tomorrow!

    03 Silverado 5.3 ECSB 4x4 Z71
    Comp Cam 206/212 .515/.522 112 lSA, hardened rods with LS9 springs

    2010 Tahoe VVT AFM 5.3
    Stock for now

  8. #8
    Lifetime Member Gregs's Avatar
    Join Date
    Sep 2008
    Posts
    306

    Default

    hey guys i'm having trouble with this again. Its weird since it was working just fine the other day and then all of the sudden i'm getting this error again. I went through and reprogrammed everything like i was supposed to. I updated everything and the right controller and everything else is fine. Any ideas?? I just don't get why one day its fine and the next its having this error.

    03 Silverado 5.3 ECSB 4x4 Z71
    Comp Cam 206/212 .515/.522 112 lSA, hardened rods with LS9 springs

    2010 Tahoe VVT AFM 5.3
    Stock for now

  9. #9
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    It does seem "strange" that it would work and then not, expect if the configuration changed and correctly the scripts are not present on the Config Filesystem of the device. Have you been able to verify that the script(s) for the specific controller do exist on the device?
    Andrew
    EFILive Crew


  10. #10
    Lifetime Member Gregs's Avatar
    Join Date
    Sep 2008
    Posts
    306

    Default

    Quote Originally Posted by Tordne View Post
    It does seem "strange" that it would work and then not, expect if the configuration changed and correctly the scripts are not present on the Config Filesystem of the device. Have you been able to verify that the script(s) for the specific controller do exist on the device?
    Click image for larger version. 

Name:	v2.png 
Views:	789 
Size:	139.2 KB 
ID:	12620

    i opened options.txt and everything looks good there too

    03 Silverado 5.3 ECSB 4x4 Z71
    Comp Cam 206/212 .515/.522 112 lSA, hardened rods with LS9 springs

    2010 Tahoe VVT AFM 5.3
    Stock for now

Page 1 of 2 12 LastLast

Similar Threads

  1. Error $0502
    By Webbs in forum AutoCal
    Replies: 5
    Last Post: December 9th, 2016, 06:31 AM
  2. V2 ($0502)
    By Chevy366 in forum FlashScan V2
    Replies: 1
    Last Post: June 23rd, 2011, 08:00 AM
  3. $0502 Error when attempting BBR on CMB849
    By vortecfcar in forum AutoCal
    Replies: 3
    Last Post: June 10th, 2011, 05:56 AM
  4. Can't BBX full flash (Error $0502, script file not found)
    By spandit in forum FlashScan V2 BB Logging
    Replies: 17
    Last Post: April 14th, 2011, 08:34 AM
  5. Error $0502 Script file not found
    By jcow in forum Allison 5 & 6 Speed
    Replies: 5
    Last Post: April 14th, 2011, 12:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •