I know there is support for the ZT-3. ZT-2 is a less ambitious version of ZT-3 that I am interested in but I want serial data capture as well.
I know there is support for the ZT-3. ZT-2 is a less ambitious version of ZT-3 that I am interested in but I want serial data capture as well.
2015 Z06 A8
If I was guessing I'd suggest that if a ZT3 will work, that a ZT2 will also work. But that's making the assumption that since they both are capable of driving Zeitronix software and gauges that they both use the same serial protocol. Ask Zeitronix if that's true and you'll have your answer. If it's different see if you can get a copy of the spec to pass on the Paul and you might find it supported in one of the next releases. And from my reading, the ZT3 is the less ambitious device and the one you want. ZT3 is $199 and ZT2 is $279.
Ira
I am making the same assumption but will contact Zeitronix just in case. I believe the ZT3 will do everything I need but would not hesitate to buy the ZT2 if there was any delay.
2015 Z06 A8
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________