Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: 12618164 -E67 ECM Full Flash Problem

  1. #1
    Senior Member
    Join Date
    May 2009
    Posts
    192

    Default 12618164 -E67 ECM Full Flash Problem

    I'm being notified by the V8 that there is no capability to full reflash my E67. Am I missing something? OS #12618164 is on the Compatibility list.
    Trailblazer "RS" 5.3L 6L80 4x4 & '07 TBSS LS2 6L90 AWD

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    "no capability" or "Compatibility" problem? What is the exact message?
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Senior Member
    Join Date
    May 2009
    Posts
    192

    Default

    Sorry...it says "Full flashing for E67 controllers is not supported"
    Trailblazer "RS" 5.3L 6L80 4x4 & '07 TBSS LS2 6L90 AWD

  4. #4
    Senior Member
    Join Date
    May 2009
    Posts
    192

    Default

    Additionally, when I do a Systems and Calibrations flash on the V7.5 side, it goes through the motions, but when I retrieve the calibrations it's the old original calibrations.
    Trailblazer "RS" 5.3L 6L80 4x4 & '07 TBSS LS2 6L90 AWD

  5. #5
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,935

    Default

    Is the tune file a .ctd you're trying to flash in V8?

    Thats weird, but then again Ive only done 2 full flashs period in the entire time Ive owned EFILive. 1 on my E67 and 1 on my T42. With that same OS ha.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  6. #6
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    TBMSport, you aren't going mad. I just checked and there is a few late model controllers we haven't activated full flashing on, E67, E83 and the Bosch V6 ECM's.
    The E83 is an oversight as I remember testing this myself, I'll check with Paul on the E67, obviously we can full flash them in V7 so it shouldn't be too much work to activate and test it for V8.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  7. #7
    Senior Member
    Join Date
    May 2009
    Posts
    192

    Default

    THANK GOD, ROSS!! I thank you...and this ECM thanks you for sparing its fate at the bottom of a city dump!
    Trailblazer "RS" 5.3L 6L80 4x4 & '07 TBSS LS2 6L90 AWD

  8. #8
    Senior Member
    Join Date
    May 2009
    Posts
    192

    Default

    Any update on this?
    Trailblazer "RS" 5.3L 6L80 4x4 & '07 TBSS LS2 6L90 AWD

  9. #9
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Yes, E67 full flash for the V8 software will be released in the next update, due this weekend in fact.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  10. #10
    Senior Member
    Join Date
    May 2009
    Posts
    192

    Default

    Has this been addressed in the August update?
    Trailblazer "RS" 5.3L 6L80 4x4 & '07 TBSS LS2 6L90 AWD

Page 1 of 2 12 LastLast

Similar Threads

  1. KR after Full Flash new OS...
    By 01Blackerado in forum Gen III V8 Specific
    Replies: 14
    Last Post: March 18th, 2011, 06:06 AM
  2. Why cant I full flash?
    By 01Blackerado in forum Gen III V8 Specific
    Replies: 12
    Last Post: March 17th, 2011, 09:11 PM
  3. Full flash and batteries went dead. ecm not working
    By 05DirtyMax in forum Duramax LLY
    Replies: 2
    Last Post: February 1st, 2010, 01:00 PM
  4. Pre Full Flash to Full Flash Tune Question
    By Donovan in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: January 13th, 2010, 11:43 AM
  5. Full flash
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: June 11th, 2006, 05:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •