I thought I'd share my little project that's been keeping me busy for the last few months...
I do some wiring work for Craig Taylor @ DynoTorque apart from running a motorcycle dyno Craig is also an expert fabricator/engineer & puts LS 1/2/3 engines into different cars, I do the wirirng on them for him & the V8 rumble/torque has finally got under my skin so he's making me one
I bought a 2001 325 M Sport Coupe for the conversion into which is going an LS1 5.7l GTO engine & 6 speed box, it's not 'just' an engine swap tho it'll need hand made header pipes, prop, steering rod etc & while we are it were installing the rear end from an E46 M3 to give the car an LSD, upgrading the suspension & brakes as well as sorting all the niggles with the car.
The Car...
M3 LSD Diff & rear end
LS1 5.7l GTO Engine & box
Laser cut widgets for the custom headers
The Carbon cube trim was worn out on the drivers door & needed replacing as I had to the door trim off to fix the CDL I decided I'd have a go at painting the trim & see what it looked like